From: Daniel Axtens <dja@xxxxxxxxxx>
[ Upstream commit 934bda59f286d0221f1a3ebab7f5156a996cc37d ]
While developing KASAN for 64-bit book3s, I hit the following stack
over-read.
It occurs because the hypercall to put characters onto the terminal
takes 2 longs (128 bits/16 bytes) of characters at a time, and so
hvc_put_chars() would unconditionally copy 16 bytes from the argument
buffer, regardless of supplied length. However, udbg_hvc_putc() can
call hvc_put_chars() with a single-byte buffer, leading to the error.
==================================================================
BUG: KASAN: stack-out-of-bounds in hvc_put_chars+0xdc/0x110
Read of size 8 at addr c0000000023e7a90 by task swapper/0
CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc2-next-20190528-02824-g048a6ab4835b #113
Call Trace:
dump_stack+0x104/0x154 (unreliable)
print_address_description+0xa0/0x30c
__kasan_report+0x20c/0x224
kasan_report+0x18/0x30
__asan_report_load8_noabort+0x24/0x40
hvc_put_chars+0xdc/0x110
hvterm_raw_put_chars+0x9c/0x110
udbg_hvc_putc+0x154/0x200
udbg_write+0xf0/0x240
console_unlock+0x868/0xd30
register_console+0x970/0xe90
register_early_udbg_console+0xf8/0x114
setup_arch+0x108/0x790
start_kernel+0x104/0x784
start_here_common+0x1c/0x534
Memory state around the buggy address:
c0000000023e7980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0000000023e7a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1
>c0000000023e7a80: f1 f1 01 f2 f2 f2 00 00 00 00 00 00 00 00 00 00
^
c0000000023e7b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0000000023e7b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Document that a 16-byte buffer is requred, and provide it in udbg.
Signed-off-by: Daniel Axtens <dja@xxxxxxxxxx>
Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/powerpc/platforms/pseries/hvconsole.c | 2 +-
drivers/tty/hvc/hvc_vio.c | 16 +++++++++++++++-
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index 74da18de853af..73ec15cd27080 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -62,7 +62,7 @@ EXPORT_SYMBOL(hvc_get_chars);
* @vtermno: The vtermno or unit_address of the adapter from which the data
* originated.
* @buf: The character buffer that contains the character data to send to
- * firmware.
+ * firmware. Must be at least 16 bytes, even if count is less than 16.
* @count: Send this number of characters.
*/
int hvc_put_chars(uint32_t vtermno, const char *buf, int count)
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 59eaa620bf13a..80fd06fbd712a 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -107,6 +107,14 @@ static int hvterm_raw_get_chars(uint32_t vtermno, char *buf, int count)
return got;
}
+/**
+ * hvterm_raw_put_chars: send characters to firmware for given vterm adapter
+ * @vtermno: The virtual terminal number.
+ * @buf: The characters to send. Because of the underlying hypercall in
+ * hvc_put_chars(), this buffer must be at least 16 bytes long, even if
+ * you are sending fewer chars.
+ * @count: number of chars to send.
+ */
static int hvterm_raw_put_chars(uint32_t vtermno, const char *buf, int count)
{
struct hvterm_priv *pv = hvterm_privs[vtermno];
@@ -219,6 +227,7 @@ static const struct hv_ops hvterm_hvsi_ops = {
static void udbg_hvc_putc(char c)
{
int count = -1;
+ unsigned char bounce_buffer[16];
if (!hvterm_privs[0])
return;
@@ -229,7 +238,12 @@ static void udbg_hvc_putc(char c)
do {
switch(hvterm_privs[0]->proto) {
case HV_PROTOCOL_RAW:
- count = hvterm_raw_put_chars(0, &c, 1);
+ /*
+ * hvterm_raw_put_chars requires at least a 16-byte
+ * buffer, so go via the bounce buffer
+ */
+ bounce_buffer[0] = c;
+ count = hvterm_raw_put_chars(0, bounce_buffer, 1);
break;
case HV_PROTOCOL_HVSI:
count = hvterm_hvsi_put_chars(0, &c, 1);
--
2.20.1
