SuperSpeedPlus peripherals must report their bMaxPower of the
configuration descriptor in units of 8mA as per the USB 3.2
specification. The current switch statement in encode_bMaxPower()
only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so
the latter falls back to USB 2.0 encoding which uses 2mA units.
Replace the switch with a simple if/else.
Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx>
---
drivers/usb/gadget/composite.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index d516e8d6cd7f..e1db94d1fe2e 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -437,12 +437,10 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
val = CONFIG_USB_GADGET_VBUS_DRAW;
if (!val)
return 0;
- switch (speed) {
- case USB_SPEED_SUPER:
- return DIV_ROUND_UP(val, 8);
- default:
+ if (speed < USB_SPEED_SUPER)
return DIV_ROUND_UP(val, 2);
- }
+ else
+ return DIV_ROUND_UP(val, 8);
}
static int config_buf(struct usb_configuration *config,
--
2.21.0
