The patch spi: Fix SPI_CS_HIGH setting when using native and GPIO CS has been applied to the spi tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.4 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 3e5ec1db8bfee845d9f8560d1c64aeaccd586398 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> Date: Fri, 18 Oct 2019 17:29:29 +0200 Subject: [PATCH] spi: Fix SPI_CS_HIGH setting when using native and GPIO CS When improving the CS GPIO support at core level, the SPI_CS_HIGH has been enabled for all the CS lines used for a given SPI controller. However, the SPI framework allows to have on the same controller native CS and GPIO CS. The native CS may not support the SPI_CS_HIGH, so they should not be setup automatically. With this patch the setting is done only for the CS that will use a GPIO as CS Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs") Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx> Link: https://lore.kernel.org/r/20191018152929.3287-1-gregory.clement@xxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/spi/spi.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index f8b4654a57d3..d07517151340 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1711,15 +1711,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi->mode |= SPI_3WIRE; if (of_property_read_bool(nc, "spi-lsb-first")) spi->mode |= SPI_LSB_FIRST; - - /* - * For descriptors associated with the device, polarity inversion is - * handled in the gpiolib, so all chip selects are "active high" in - * the logical sense, the gpiolib will invert the line if need be. - */ - if (ctlr->use_gpio_descriptors) - spi->mode |= SPI_CS_HIGH; - else if (of_property_read_bool(nc, "spi-cs-high")) + if (of_property_read_bool(nc, "spi-cs-high")) spi->mode |= SPI_CS_HIGH; /* Device DUAL/QUAD mode */ @@ -1783,6 +1775,14 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, } spi->chip_select = value; + /* + * For descriptors associated with the device, polarity inversion is + * handled in the gpiolib, so all gpio chip selects are "active high" + * in the logical sense, the gpiolib will invert the line if need be. + */ + if ((ctlr->use_gpio_descriptors) && ctlr->cs_gpiods[spi->chip_select]) + spi->mode |= SPI_CS_HIGH; + /* Device speed */ rc = of_property_read_u32(nc, "spi-max-frequency", &value); if (rc) { -- 2.20.1
