The patch below does not apply to the 3.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable@xxxxxxxxxxxxxxx>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 2d93aee152b1758a94a18fe15d72153ba73b5679 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx> Date: Tue, 24 Dec 2013 14:15:41 +0200 Subject: [PATCH] iwlwifi: pcie: enable oscillator for L1 exit Enabling the oscillator consumes slightly more power (100uA) but allows to make sure that we exit from L1 on time. Not doing so might lead to a PCIe specification violation since we might wake up from L1 at the wrong time. This issue has been identified on 3160 and 7260 only. On older NICs L1 off is not enabled, on newer NICs (7265), the issue is fixed. When the bug occurs the user sees that the NIC has disappeared from the PCI bridge, any access to the device returns 0xff. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64541 and has been extensively discussed here: http://markmail.org/thread/mfmpzqt3r333n4bo Cc: stable@xxxxxxxxxxxxxxx [3.10+] Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reported-and-tested-by: wzyboy <wzyboy@xxxxxxxxxx> Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx> diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index d69b0fb0a434..100bd0d79681 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -277,4 +277,8 @@ static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) /*********************** END TX SCHEDULER *************************************/ +/* Oscillator clock */ +#define OSC_CLK (0xa04068) +#define OSC_CLK_FORCE_CONTROL (0x8) + #endif /* __iwl_prph_h__ */ diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 16f66c1a23de..f9507807b486 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -178,6 +178,28 @@ static int iwl_pcie_apm_init(struct iwl_trans *trans) goto out; } + if (trans->cfg->host_interrupt_operation_mode) { + /* + * This is a bit of an abuse - This is needed for 7260 / 3160 + * only check host_interrupt_operation_mode even if this is + * not related to host_interrupt_operation_mode. + * + * Enable the oscillator to count wake up time for L1 exit. This + * consumes slightly more power (100uA) - but allows to be sure + * that we wake up from L1 on time. + * + * This looks weird: read twice the same register, discard the + * value, set a bit, and yet again, read that same register + * just to discard the value. But that's the way the hardware + * seems to like it. + */ + iwl_read_prph(trans, OSC_CLK); + iwl_read_prph(trans, OSC_CLK); + iwl_set_bits_prph(trans, OSC_CLK, OSC_CLK_FORCE_CONTROL); + iwl_read_prph(trans, OSC_CLK); + iwl_read_prph(trans, OSC_CLK); + } + /* * Enable DMA clock and wait for it to stabilize. * -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html