Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: d980f67059db - Linux 5.3.6
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
All kernel binaries, config files, and logs are available for download here:
https://artifacts.cki-project.org/pipelines/225296
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: d980f67059db - Linux 5.3.6
We grabbed the 2a712158cf24 commit of the stable queue repository.
We then merged the patchset with `git am`:
panic-ensure-preemption-is-disabled-during-panic.patch
usb-rio500-remove-rio-500-kernel-driver.patch
usb-yurex-don-t-retry-on-unexpected-errors.patch
usb-yurex-fix-null-derefs-on-disconnect.patch
usb-usb-skeleton-fix-runtime-pm-after-driver-unbind.patch
usb-usb-skeleton-fix-null-deref-on-disconnect.patch
xhci-fix-false-warning-message-about-wrong-bounce-buffer-write-length.patch
xhci-prevent-device-initiated-u1-u2-link-pm-if-exit-latency-is-too-long.patch
xhci-check-all-endpoints-for-lpm-timeout.patch
xhci-fix-usb-3.1-capability-detection-on-early-xhci-1.1-spec-based-hosts.patch
usb-xhci-wait-for-cnr-controller-not-ready-bit-in-xhci-resume.patch
xhci-prevent-deadlock-when-xhci-adapter-breaks-during-init.patch
xhci-increase-sts_save-timeout-in-xhci_suspend.patch
xhci-fix-null-pointer-dereference-in-xhci_clear_tt_buffer_complete.patch
usb-adutux-fix-use-after-free-on-disconnect.patch
usb-adutux-fix-null-derefs-on-disconnect.patch
usb-adutux-fix-use-after-free-on-release.patch
usb-iowarrior-fix-use-after-free-on-disconnect.patch
usb-iowarrior-fix-use-after-free-on-release.patch
usb-iowarrior-fix-use-after-free-after-driver-unbind.patch
usb-usblp-fix-runtime-pm-after-driver-unbind.patch
usb-chaoskey-fix-use-after-free-on-release.patch
usb-ldusb-fix-null-derefs-on-driver-unbind.patch
serial-uartlite-fix-exit-path-null-pointer.patch
serial-uartps-fix-uartps_major-handling.patch
usb-serial-keyspan-fix-null-derefs-on-open-and-write.patch
usb-serial-ftdi_sio-add-device-ids-for-sienna-and-echelon-pl-20.patch
usb-serial-option-add-telit-fn980-compositions.patch
usb-serial-option-add-support-for-cinterion-cls8-devices.patch
usb-serial-fix-runtime-pm-after-driver-unbind.patch
usb-usblcd-fix-i-o-after-disconnect.patch
usb-microtek-fix-info-leak-at-probe.patch
usb-dummy-hcd-fix-power-budget-for-superspeed-mode.patch
usb-renesas_usbhs-gadget-do-not-discard-queues-in-usb_ep_set_-halt-wedge.patch
usb-renesas_usbhs-gadget-fix-usb_ep_set_-halt-wedge-behavior.patch
usb-typec-tcpm-usb-typec-tcpm-fix-a-signedness-bug-in-tcpm_fw_get_caps.patch
usb-typec-ucsi-ccg-remove-run_isr-flag.patch
usb-typec-ucsi-displayport-fix-for-the-mode-entering-routine.patch
usb-legousbtower-fix-slab-info-leak-at-probe.patch
usb-legousbtower-fix-deadlock-on-disconnect.patch
usb-legousbtower-fix-potential-null-deref-on-disconnect.patch
usb-legousbtower-fix-open-after-failed-reset-request.patch
usb-legousbtower-fix-use-after-free-on-release.patch
mei-me-add-comet-point-lake-lp-device-ids.patch
mei-avoid-fw-version-request-on-ibex-peak-and-earlier.patch
Compile testing
---------------
We compiled the kernel for 3 architectures:
aarch64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
ppc64le:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
x86_64:
make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ jvm test suite
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ iotop: sanity
✅ tuned: tune-processes-through-perf
✅ Usex - version 1.9-29
✅ stress: stress-ng
🚧 ✅ LTP lite
Host 2:
✅ Boot test
✅ selinux-policy: serge-testsuite
ppc64le:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
Host 2:
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ jvm test suite
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ iotop: sanity
✅ tuned: tune-processes-through-perf
✅ Usex - version 1.9-29
🚧 ✅ LTP lite
x86_64:
Host 1:
✅ Boot test
✅ selinux-policy: serge-testsuite
Host 2:
⚡ Internal infrastructure issues prevented one or more tests (marked
with ⚡⚡⚡) from running on this architecture.
This is not the fault of the kernel that was tested.
✅ Boot test
✅ Podman system integration test (as root)
✅ Podman system integration test (as user)
✅ jvm test suite
✅ AMTU (Abstract Machine Test Utility)
✅ LTP: openposix test suite
✅ audit: audit testsuite test
✅ httpd: mod_ssl smoke sanity
✅ iotop: sanity
✅ tuned: tune-processes-through-perf
✅ pciutils: sanity smoke test
✅ Usex - version 1.9-29
✅ stress: stress-ng
🚧 ⚡⚡⚡ LTP lite
Test sources: https://github.com/CKI-project/tests-beaker
💚 Pull requests are welcome for new tests or improvements to existing tests!
Waived tests
------------
If the test run included waived tests, they are marked with 🚧. Such tests are
executed but their results are not taken into account. Tests are waived when
their results are not reliable enough, e.g. when they're just introduced or are
being fixed.
