[PATCH 4.14 075/185] ASoC: rsnd: dont call clk_get_rate() under atomic context

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>

[ Upstream commit 06e8f5c842f2dbb232897ba967ea7b422745c271 ]

ADG is using clk_get_rate() under atomic context, thus, we might
have scheduling issue.
To avoid this issue, we need to get/keep clk rate under
non atomic context.

We need to handle ADG as special device at Renesas Sound driver.
>From SW point of view, we want to impletent it as
rsnd_mod_ops :: prepare, but it makes code just complicate.

To avoid complicated code/patch, this patch adds new clk_rate[] array,
and keep clk IN rate when rsnd_adg_clk_enable() was called.

Reported-by: Leon Kong <Leon.KONG@xxxxxxxxxxxx>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Tested-by: Leon Kong <Leon.KONG@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/87v9vb0xkp.wl-kuninori.morimoto.gx@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 sound/soc/sh/rcar/adg.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c
index eb7879bcc6a79..686401bcd1f53 100644
--- a/sound/soc/sh/rcar/adg.c
+++ b/sound/soc/sh/rcar/adg.c
@@ -33,6 +33,7 @@ struct rsnd_adg {
 	struct clk *clkout[CLKOUTMAX];
 	struct clk_onecell_data onecell;
 	struct rsnd_mod mod;
+	int clk_rate[CLKMAX];
 	u32 flags;
 	u32 ckr;
 	u32 rbga;
@@ -110,9 +111,9 @@ static void __rsnd_adg_get_timesel_ratio(struct rsnd_priv *priv,
 	unsigned int val, en;
 	unsigned int min, diff;
 	unsigned int sel_rate[] = {
-		clk_get_rate(adg->clk[CLKA]),	/* 0000: CLKA */
-		clk_get_rate(adg->clk[CLKB]),	/* 0001: CLKB */
-		clk_get_rate(adg->clk[CLKC]),	/* 0010: CLKC */
+		adg->clk_rate[CLKA],	/* 0000: CLKA */
+		adg->clk_rate[CLKB],	/* 0001: CLKB */
+		adg->clk_rate[CLKC],	/* 0010: CLKC */
 		adg->rbga_rate_for_441khz,	/* 0011: RBGA */
 		adg->rbgb_rate_for_48khz,	/* 0100: RBGB */
 	};
@@ -328,7 +329,7 @@ int rsnd_adg_clk_query(struct rsnd_priv *priv, unsigned int rate)
 	 * AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC/AUDIO_CLKI.
 	 */
 	for_each_rsnd_clk(clk, adg, i) {
-		if (rate == clk_get_rate(clk))
+		if (rate == adg->clk_rate[i])
 			return sel_table[i];
 	}
 
@@ -394,10 +395,18 @@ void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable)
 
 	for_each_rsnd_clk(clk, adg, i) {
 		ret = 0;
-		if (enable)
+		if (enable) {
 			ret = clk_prepare_enable(clk);
-		else
+
+			/*
+			 * We shouldn't use clk_get_rate() under
+			 * atomic context. Let's keep it when
+			 * rsnd_adg_clk_enable() was called
+			 */
+			adg->clk_rate[i] = clk_get_rate(adg->clk[i]);
+		} else {
 			clk_disable_unprepare(clk);
+		}
 
 		if (ret < 0)
 			dev_warn(dev, "can't use clk %d\n", i);
-- 
2.20.1






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux