From: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> commit 03e61929c0d227ed3e1c322fc3804216ea298b7e upstream. 150MHz is a fundamental limitation of RK3328 Soc, w/o this limitation, eMMC, for instance, will run into 200MHz clock rate in HS200 mode, which makes the RK3328 boards not always boot properly. By adding it in rk3328.dtsi would also obviate the worry of missing it when adding new boards. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@xxxxxxxxxxxxxxx Cc: Robin Murphy <robin.murphy@xxxxxxx> Cc: Liang Chen <cl@xxxxxxxxxxxxxx> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 3 +++ 1 file changed, 3 insertions(+) --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -685,6 +685,7 @@ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; @@ -696,6 +697,7 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; @@ -707,6 +709,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; };