From: Zhan Liu <zhan.liu@xxxxxxx>
[Why]
When more than 2 displays are connected to the graphics card,
only the minimum memory clock is needed. However, when more
displays are connected, the minimum memory clock is not
sufficient enough to support the overwhelming bandwidth.
System will hang under this circumstance.
Also, the old code didn't address HBM cards, which has 2
pseudo channels. We need to add the HBM part here.
[How]
When graphics card connects to 2 or more displays,
switch to high memory clock. Also, choose memory
multiplier based on whether its regular DRAM or HBM.
Signed-off-by: Zhan Liu <zhan.liu@xxxxxxx>
Reviewed-by: Roman Li <Roman.Li@xxxxxxx>
Acked-by: Leo Li <sunpeng.li@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
(cherry picked from commit c02d6a161395dfc0c2fdabb9e976a229017288d8)
cc: stable@xxxxxxxxxxxxxxx # 5.3.x
---
.../display/dc/clk_mgr/dce110/dce110_clk_mgr.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
index ee32d2c19305..36277bca0326 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c
@@ -174,6 +174,10 @@ void dce11_pplib_apply_display_requirements(
struct dc_state *context)
{
struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;
+ int memory_type_multiplier = MEMORY_TYPE_MULTIPLIER_CZ;
+
+ if (dc->bw_vbios && dc->bw_vbios->memory_type == bw_def_hbm)
+ memory_type_multiplier = MEMORY_TYPE_HBM;
pp_display_cfg->all_displays_in_sync =
context->bw_ctx.bw.dce.all_displays_in_sync;
@@ -186,8 +190,18 @@ void dce11_pplib_apply_display_requirements(
pp_display_cfg->cpu_pstate_separation_time =
context->bw_ctx.bw.dce.blackout_recovery_time_us;
- pp_display_cfg->min_memory_clock_khz = context->bw_ctx.bw.dce.yclk_khz
- / MEMORY_TYPE_MULTIPLIER_CZ;
+ /*
+ * TODO: determine whether the bandwidth has reached memory's limitation
+ * , then change minimum memory clock based on real-time bandwidth
+ * limitation.
+ */
+ if (ASICREV_IS_VEGA20_P(dc->ctx->asic_id.hw_internal_rev) && (context->stream_count >= 2)) {
+ pp_display_cfg->min_memory_clock_khz = max(pp_display_cfg->min_memory_clock_khz,
+ (uint32_t) (dc->bw_vbios->high_yclk.value / memory_type_multiplier / 10000));
+ } else {
+ pp_display_cfg->min_memory_clock_khz = context->bw_ctx.bw.dce.yclk_khz
+ / memory_type_multiplier;
+ }
pp_display_cfg->min_engine_clock_khz = determine_sclk_from_bounding_box(
dc,
--
2.20.1
