Re: [3.8.y.z extended stable] Linux 3.8.13.17

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



diff --git a/Makefile b/Makefile
index 7d89342..54a09a9 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 13
-EXTRAVERSION = .16
+EXTRAVERSION = .17
 NAME = Remoralised Urchins Update
 
 # *DOCUMENTATION*
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index 6336bcb..0798e5f 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/ptrace.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/apic.h>
 
@@ -816,6 +817,18 @@ out:
 	return ret;
 }
 
+static void ibs_eilvt_setup(void)
+{
+	/*
+	 * Force LVT offset assignment for family 10h: The offsets are
+	 * not assigned by the BIOS for this family, so the OS is
+	 * responsible for doing it. If the OS assignment fails, fall
+	 * back to BIOS settings and try to setup this.
+	 */
+	if (boot_cpu_data.x86 == 0x10)
+		force_ibs_eilvt_setup();
+}
+
 static inline int get_ibs_lvt_offset(void)
 {
 	u64 val;
@@ -851,6 +864,36 @@ static void clear_APIC_ibs(void *dummy)
 		setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_FIX, 1);
 }
 
+#ifdef CONFIG_PM
+
+static int perf_ibs_suspend(void)
+{
+	clear_APIC_ibs(NULL);
+	return 0;
+}
+
+static void perf_ibs_resume(void)
+{
+	ibs_eilvt_setup();
+	setup_APIC_ibs(NULL);
+}
+
+static struct syscore_ops perf_ibs_syscore_ops = {
+	.resume		= perf_ibs_resume,
+	.suspend	= perf_ibs_suspend,
+};
+
+static void perf_ibs_pm_init(void)
+{
+	register_syscore_ops(&perf_ibs_syscore_ops);
+}
+
+#else
+
+static inline void perf_ibs_pm_init(void) { }
+
+#endif
+
 static int __cpuinit
 perf_ibs_cpu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
 {
@@ -877,18 +920,12 @@ static __init int amd_ibs_init(void)
 	if (!caps)
 		return -ENODEV;	/* ibs not supported by the cpu */
 
-	/*
-	 * Force LVT offset assignment for family 10h: The offsets are
-	 * not assigned by the BIOS for this family, so the OS is
-	 * responsible for doing it. If the OS assignment fails, fall
-	 * back to BIOS settings and try to setup this.
-	 */
-	if (boot_cpu_data.x86 == 0x10)
-		force_ibs_eilvt_setup();
+	ibs_eilvt_setup();
 
 	if (!ibs_eilvt_valid())
 		goto out;
 
+	perf_ibs_pm_init();
 	get_online_cpus();
 	ibs_caps = caps;
 	/* make ibs_caps visible to other cpus: */
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 6ed91d9..1d7fdbe 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1113,7 +1113,7 @@ ENTRY(ftrace_caller)
 	pushl $0	/* Pass NULL as regs pointer */
 	movl 4*4(%esp), %eax
 	movl 0x4(%ebp), %edx
-	leal function_trace_op, %ecx
+	movl function_trace_op, %ecx
 	subl $MCOUNT_INSN_SIZE, %eax
 
 .globl ftrace_call
@@ -1171,7 +1171,7 @@ ENTRY(ftrace_regs_caller)
 	movl 12*4(%esp), %eax	/* Load ip (1st parameter) */
 	subl $MCOUNT_INSN_SIZE, %eax	/* Adjust ip */
 	movl 0x4(%ebp), %edx	/* Load parent ip (2nd parameter) */
-	leal function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
+	movl function_trace_op, %ecx /* Save ftrace_pos in 3rd parameter */
 	pushl %esp		/* Save pt_regs as 4th parameter */
 
 GLOBAL(ftrace_regs_call)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index cb3c591..310b270 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -88,7 +88,7 @@ END(function_hook)
 	MCOUNT_SAVE_FRAME \skip
 
 	/* Load the ftrace_ops into the 3rd parameter */
-	leaq function_trace_op, %rdx
+	movq function_trace_op(%rip), %rdx
 
 	/* Load ip into the first parameter */
 	movq RIP(%rsp), %rdi
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index b8e53d9..6f09de3 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1178,12 +1178,18 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
 	enum pipe pipe;
 	struct intel_crtc *intel_crtc;
 
+	dev_priv->ddi_plls.spll_refcount = 0;
+	dev_priv->ddi_plls.wrpll1_refcount = 0;
+	dev_priv->ddi_plls.wrpll2_refcount = 0;
+
 	for_each_pipe(pipe) {
 		intel_crtc =
 			to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
 
-		if (!intel_crtc->active)
+		if (!intel_crtc->active) {
+			intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
 			continue;
+		}
 
 		intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
 								 pipe);
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index d64923d..67c05db 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
 
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
 #define NUM_REAL_CORES		32	/* Number of Real cores per cpu */
-#define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
+#define CORETEMP_NAME_LENGTH	19	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
 #define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)
 #define MAX_CORE_DATA		(NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index b8f5688..dfd6eba 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1276,7 +1276,7 @@ read_again:
 			/* Could not read all from this device, so we will
 			 * need another r10_bio.
 			 */
-			sectors_handled = (r10_bio->sectors + max_sectors
+			sectors_handled = (r10_bio->sector + max_sectors
 					   - bio->bi_sector);
 			r10_bio->sectors = max_sectors;
 			spin_lock_irq(&conf->device_lock);
@@ -1284,7 +1284,7 @@ read_again:
 				bio->bi_phys_segments = 2;
 			else
 				bio->bi_phys_segments++;
-			spin_unlock(&conf->device_lock);
+			spin_unlock_irq(&conf->device_lock);
 			/* Cannot call generic_make_request directly
 			 * as that will be queued in __generic_make_request
 			 * and subsequent mempool_alloc might block
@@ -3153,10 +3153,6 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
 			if (j == conf->copies) {
 				/* Cannot recover, so abort the recovery or
 				 * record a bad block */
-				put_buf(r10_bio);
-				if (rb2)
-					atomic_dec(&rb2->remaining);
-				r10_bio = rb2;
 				if (any_working) {
 					/* problem is that there are bad blocks
 					 * on other device(s)
@@ -3188,6 +3184,10 @@ static sector_t sync_request(struct mddev *mddev, sector_t sector_nr,
 					mirror->recovery_disabled
 						= mddev->recovery_disabled;
 				}
+				put_buf(r10_bio);
+				if (rb2)
+					atomic_dec(&rb2->remaining);
+				r10_bio = rb2;
 				break;
 			}
 		}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 51887b3..2ffa02c 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3420,7 +3420,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			 */
 			set_bit(R5_Insync, &dev->flags);
 
-		if (rdev && test_bit(R5_WriteError, &dev->flags)) {
+		if (test_bit(R5_WriteError, &dev->flags)) {
 			/* This flag does not apply to '.replacement'
 			 * only to .rdev, so make sure to check that*/
 			struct md_rdev *rdev2 = rcu_dereference(
@@ -3433,7 +3433,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			} else
 				clear_bit(R5_WriteError, &dev->flags);
 		}
-		if (rdev && test_bit(R5_MadeGood, &dev->flags)) {
+		if (test_bit(R5_MadeGood, &dev->flags)) {
 			/* This flag does not apply to '.replacement'
 			 * only to .rdev, so make sure to check that*/
 			struct md_rdev *rdev2 = rcu_dereference(
diff --git a/drivers/staging/comedi/drivers/8255_pci.c b/drivers/staging/comedi/drivers/8255_pci.c
index e0a7952..92ee23e 100644
--- a/drivers/staging/comedi/drivers/8255_pci.c
+++ b/drivers/staging/comedi/drivers/8255_pci.c
@@ -122,7 +122,7 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = {
 		.name		= "cb_pci-dio48h",
 		.vendor		= PCI_VENDOR_ID_CB,
 		.device		= PCI_DEVICE_ID_CB_PCIDIO48H,
-		.dio_badr	= 1,
+		.dio_badr	= 1,	/* only for older boards */
 		.n_8255		= 2,
 	}, {
 		.name		= "cb_pci-dio96h",
@@ -224,6 +224,7 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
 	unsigned long len;
 	int ret;
 	int i;
+	int dio_badr;
 
 	board = pci_8255_find_boardinfo(dev, pcidev);
 	if (!board)
@@ -239,8 +240,21 @@ static int pci_8255_auto_attach(struct comedi_device *dev,
 	ret = comedi_pci_enable(pcidev, dev->board_name);
 	if (ret)
 		return ret;
-	iobase = pci_resource_start(pcidev, board->dio_badr);
-	len = pci_resource_len(pcidev, board->dio_badr);
+	dio_badr = board->dio_badr;
+	/*
+	 * For Measurement Computing / ComputerBoards PCI-DIO48H, use the
+	 * PCI BAR 2 region, if non-zero length, else use the PCI BAR 1 region
+	 * from the board entry.  This is because the board was redesigned to
+	 * use a different PCI interface chip, with the user registers in a
+	 * different PCI BAR region.
+	 */
+	if (pcidev->vendor == PCI_VENDOR_ID_CB &&
+	    pcidev->device == PCI_DEVICE_ID_CB_PCIDIO48H &&
+	    pci_resource_len(pcidev, 2))
+		dio_badr = 2;
+
+	iobase = pci_resource_start(pcidev, dio_badr);
+	len = pci_resource_len(pcidev, dio_badr);
 
 	if (board->is_mmio) {
 		devpriv->mmio_base = ioremap(iobase, len);
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 7f94242..97de74e 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -331,8 +331,8 @@ static int apci1032_auto_attach(struct comedi_device *dev,
 	s = &dev->subdevices[1];
 	if (dev->irq) {
 		dev->read_subdev = s;
-		s->type		= COMEDI_SUBD_DI | SDF_CMD_READ;
-		s->subdev_flags	= SDF_READABLE;
+		s->type		= COMEDI_SUBD_DI;
+		s->subdev_flags	= SDF_READABLE | SDF_CMD_READ;
 		s->n_chan	= 1;
 		s->maxdata	= 1;
 		s->range_table	= &range_digital;
diff --git a/fs/dcache.c b/fs/dcache.c
index de73da2..675e5d3 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2710,8 +2710,13 @@ char *d_path(const struct path *path, char *buf, int buflen)
 	 * thus don't need to be hashed.  They also don't need a name until a
 	 * user wants to identify the object in /proc/pid/fd/.  The little hack
 	 * below allows us to generate a name for these objects on demand:
+	 *
+	 * Some pseudo inodes are mountable.  When they are mounted
+	 * path->dentry == path->mnt->mnt_root.  In that case don't call d_dname
+	 * and instead have d_path return the mounted path.
 	 */
-	if (path->dentry->d_op && path->dentry->d_op->d_dname)
+	if (path->dentry->d_op && path->dentry->d_op->d_dname &&
+	    (!IS_ROOT(path->dentry) || path->dentry != path->mnt->mnt_root))
 		return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
 
 	get_fs_root(current->fs, &root);
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 310972b..17eaad5 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -517,13 +517,16 @@ writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
 	}
 	WARN_ON(inode->i_state & I_SYNC);
 	/*
-	 * Skip inode if it is clean. We don't want to mess with writeback
-	 * lists in this function since flusher thread may be doing for example
-	 * sync in parallel and if we move the inode, it could get skipped. So
-	 * here we make sure inode is on some writeback list and leave it there
-	 * unless we have completely cleaned the inode.
+	 * Skip inode if it is clean and we have no outstanding writeback in
+	 * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
+	 * function since flusher thread may be doing for example sync in
+	 * parallel and if we move the inode, it could get skipped. So here we
+	 * make sure inode is on some writeback list and leave it there unless
+	 * we have completely cleaned the inode.
 	 */
-	if (!(inode->i_state & I_DIRTY))
+	if (!(inode->i_state & I_DIRTY) &&
+	    (wbc->sync_mode != WB_SYNC_ALL ||
+	     !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK)))
 		goto out;
 	inode->i_state |= I_SYNC;
 	spin_unlock(&inode->i_lock);
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index cbd6618..958a5b5 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1440,17 +1440,19 @@ static int nilfs_segctor_collect(struct nilfs_sc_info *sci,
 
 		nilfs_clear_logs(&sci->sc_segbufs);
 
-		err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
-		if (unlikely(err))
-			return err;
-
 		if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
 			err = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
 							sci->sc_freesegs,
 							sci->sc_nfreesegs,
 							NULL);
 			WARN_ON(err); /* do not happen */
+			sci->sc_stage.flags &= ~NILFS_CF_SUFREED;
 		}
+
+		err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
+		if (unlikely(err))
+			return err;
+
 		nadd = min_t(int, nadd << 1, SC_MAX_SEGDELTA);
 		sci->sc_stage = prev_stage;
 	}
diff --git a/net/compat.c b/net/compat.c
index dd32e34..f50161f 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -780,21 +780,16 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
 	if (flags & MSG_CMSG_COMPAT)
 		return -EINVAL;
 
-	if (COMPAT_USE_64BIT_TIME)
-		return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
-				      flags | MSG_CMSG_COMPAT,
-				      (struct timespec *) timeout);
-
 	if (timeout == NULL)
 		return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
 				      flags | MSG_CMSG_COMPAT, NULL);
 
-	if (get_compat_timespec(&ktspec, timeout))
+	if (compat_get_timespec(&ktspec, timeout))
 		return -EFAULT;
 
 	datagrams = __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
 				   flags | MSG_CMSG_COMPAT, &ktspec);
-	if (datagrams > 0 && put_compat_timespec(&ktspec, timeout))
+	if (datagrams > 0 && compat_put_timespec(&ktspec, timeout))
 		datagrams = -EFAULT;
 
 	return datagrams;
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index 8eb9501..b7ebe23 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -421,8 +421,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
 				 struct rds_ib_refill_cache *cache)
 {
 	unsigned long flags;
-	struct list_head *old;
-	struct list_head __percpu *chpfirst;
+	struct list_head *old, *chpfirst;
 
 	local_irq_save(flags);
 
@@ -432,7 +431,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
 	else /* put on front */
 		list_add_tail(new_item, chpfirst);
 
-	__this_cpu_write(chpfirst, new_item);
+	__this_cpu_write(cache->percpu->first, new_item);
 	__this_cpu_inc(cache->percpu->count);
 
 	if (__this_cpu_read(cache->percpu->count) < RDS_IB_RECYCLE_BATCH_COUNT)
@@ -452,7 +451,7 @@ static void rds_ib_recv_cache_put(struct list_head *new_item,
 	} while (old);
 
 
-	__this_cpu_write(chpfirst, NULL);
+	__this_cpu_write(cache->percpu->first, NULL);
 	__this_cpu_write(cache->percpu->count, 0);
 end:
 	local_irq_restore(flags);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]