[v2] mtd: rawnand: Change calculating of position page containing BBM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change calculating of position page containing BBM

If none of BBM flags are set then function nand_bbm_get_next_page 
reports EINVAL. It causes that BBM is not read at all during scanning
factory bad blocks. The result is that the BBT table is build without 
checking factory BBM at all. For Micron flash memories none of these 
flags are set if page size is different than 2048 bytes.

Address this regression by:
- adding NAND_BBM_FIRSTPAGE chip flag without any condition. It solves
  issue only for Micron devices.
- changing the nand_bbm_get_next_page_function. It will return 0 
  if no of BBM flag is set and page parameter is 0. After that modification
  way of discovering factory bad blocks will work similar as in kernel 
  version 5.1.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: f90da7818b14 (mtd: rawnand: Support bad block markers in first, second or last page)
Signed-off-by: Piotr Sroka <piotrs@xxxxxxxxxxx>
Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
Changes for v2:
- add fix for micron nand driver
- add fixes and stable tags
---
 drivers/mtd/nand/raw/nand_base.c   | 8 ++++++--
 drivers/mtd/nand/raw/nand_micron.c | 4 +++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 5c2c30a7dffa..f64e3b6605c6 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -292,12 +292,16 @@ int nand_bbm_get_next_page(struct nand_chip *chip, int page)
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int last_page = ((mtd->erasesize - mtd->writesize) >>
 			 chip->page_shift) & chip->pagemask;
+	unsigned int bbm_flags = NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE
+		| NAND_BBM_LASTPAGE;
 
+	if (page == 0 && !(chip->options & bbm_flags))
+		return 0;
 	if (page == 0 && chip->options & NAND_BBM_FIRSTPAGE)
 		return 0;
-	else if (page <= 1 && chip->options & NAND_BBM_SECONDPAGE)
+	if (page <= 1 && chip->options & NAND_BBM_SECONDPAGE)
 		return 1;
-	else if (page <= last_page && chip->options & NAND_BBM_LASTPAGE)
+	if (page <= last_page && chip->options & NAND_BBM_LASTPAGE)
 		return last_page;
 
 	return -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 1622d3145587..913f42854563 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -438,8 +438,10 @@ static int micron_nand_init(struct nand_chip *chip)
 	if (ret)
 		goto err_free_manuf_data;
 
+	chip->options |= NAND_BBM_FIRSTPAGE;
+
 	if (mtd->writesize == 2048)
-		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
+		chip->options |= NAND_BBM_SECONDPAGE;
 
 	ondie = micron_supports_on_die_ecc(chip);
 
-- 
2.15.0




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux