Re: [PATCH] Revert "ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware."

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 9/8/2019 8:44 AM, Stefan Wahren wrote:
> Since release of the new BCM2835 PM driver there has been several reports
> of V3D probing issues. This is caused by timeouts during powering-up the
> GRAFX PM domain:
> 
>   bcm2835-power: Timeout waiting for grafx power OK
> 
> I was able to reproduce this reliable on my Raspberry Pi 3B+ after setting
> force_turbo=1 in the firmware configuration. Since there are no issues
> using the firmware PM driver with the same setup, there must be an issue
> in the BCM2835 PM driver.
> 
> Unfortunately there hasn't been much progress in identifying the root cause
> since June (mostly in the lack of documentation), so i decided to switch
> back until the issue in the BCM2835 PM driver is fixed.
> 
> Link: https://github.com/raspberrypi/linux/issues/3046
> Fixes: e1dc2b2e1bef (" ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware.")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>

Applied to devicetree/fixes, thanks!
-- 
Florian



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux