From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> [ Upstream commit 7c526608d5afb62cbc967225e2ccaacfdd142e9d ] In cases when SDIO IRQs have been enabled, runtime suspend is prevented by the driver. However, this still means dw_mci_runtime_suspend|resume() gets called during system suspend/resume, via pm_runtime_force_suspend|resume(). This means during system suspend/resume, the register context of the dw_mmc device most likely loses its register context, even in cases when SDIO IRQs have been enabled. To re-enable the SDIO IRQs during system resume, the dw_mmc driver currently relies on the mmc core to re-enable the SDIO IRQs when it resumes the SDIO card, but this isn't the recommended solution. Instead, it's better to deal with this locally in the dw_mmc driver, so let's do that. Tested-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/mmc/host/dw_mmc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 60c3a06e3469a..45c3490546839 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -3482,6 +3482,10 @@ int dw_mci_runtime_resume(struct device *dev) /* Force setup bus to guarantee available clock output */ dw_mci_setup_bus(host->slot, true); + /* Re-enable SDIO interrupts. */ + if (sdio_irq_claimed(host->slot->mmc)) + __dw_mci_enable_sdio_irq(host->slot, 1); + /* Now that slots are all setup, we can enable card detect */ dw_mci_enable_cd(host); -- 2.20.1
