On Wed, Sep 18, 2019 at 02:50:48AM +0900, Tokunori Ikegami wrote:
> As reported by the OpenWRT team, write requests sometimes fail on some
> platforms.
> Currently to check the state chip_ready() is used correctly as described by
> the flash memory S29GL256P11TFI01 datasheet.
> Also chip_good() is used to check if the write is succeeded and it was
> implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error
> checking").
> But actually the write failure is caused on some platforms and also it can
> be fixed by using chip_good() to check the state and retry instead.
> Also it seems that it is caused after repeated about 1,000 times to retry
> the write one word with the reset command.
> By using chip_good() to check the state to be done it can be reduced the
> retry with reset.
> It is depended on the actual flash chip behavior so the root cause is
> unknown.
>
> Cc: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> Cc: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
> Cc: linux-mtd@xxxxxxxxxxxxxxxxxxx
> Cc: stable@xxxxxxxxxxxxxxx
> Reported-by: Fabio Bettoni <fbettoni@xxxxxxxxx>
> Signed-off-by: Felix Fietkau <nbd@xxxxxxxx>
> Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
> Signed-off-by: Tokunori Ikegami <ikegami.t@xxxxxxxxx>
> [vigneshr@xxxxxx: Fix a checkpatch warning]
> Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx>
> ---
> drivers/mtd/chips/cfi_cmdset_0002.c | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
> mode change 100644 => 100755 drivers/mtd/chips/cfi_cmdset_0002.c
You changed the file to be executable??? That's not ok :(
Also, what is the git commit id of this patch in Linus's tree? I can't
seem to find it there.
thanks,
greg k-h
