Re: [PATCH v4] dmaengine: tegra210-adma: fix transfer failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/09/2019 10:35, Sameer Pujar wrote:
> From Tegra186 onwards OUTSTANDING_REQUESTS field is added in channel
> configuration register(bits 7:4) which defines the maximum number of reads
> from the source and writes to the destination that may be outstanding at
> any given point of time. This field must be programmed with a value
> between 1 and 8. A value of 0 will prevent any transfers from happening.
> 
> Thus added 'has_outstanding_reqs' bool member in chip data structure and is
> set to false for Tegra210, since the field is not applicable. For Tegra186
> it is set to true and channel configuration is updated with maximum
> outstanding requests.
> 
> Fixes: 433de642a76c ("dmaengine: tegra210-adma: add support for Tegra186/Tegra194")
> Cc: stable@xxxxxxxxxxxxxxx
> 
> Signed-off-by: Sameer Pujar <spujar@xxxxxxxxxx>
> ---
>  drivers/dma/tegra210-adma.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
> index 5f8adf5..6e12685 100644
> --- a/drivers/dma/tegra210-adma.c
> +++ b/drivers/dma/tegra210-adma.c
> @@ -40,6 +40,7 @@
>  #define ADMA_CH_CONFIG_MAX_BURST_SIZE                   16
>  #define ADMA_CH_CONFIG_WEIGHT_FOR_WRR(val)		((val) & 0xf)
>  #define ADMA_CH_CONFIG_MAX_BUFS				8
> +#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs)	(reqs << 4)
>  
>  #define ADMA_CH_FIFO_CTRL				0x2c
>  #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
> @@ -77,6 +78,7 @@ struct tegra_adma;
>   * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
>   * @ch_req_rx_shift: Register offset for AHUB receive channel select.
>   * @ch_base_offset: Register offset of DMA channel registers.
> + * @has_outstanding_reqs: If DMA channel can have outstanding requests.
>   * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
>   * @ch_req_mask: Mask for Tx or Rx channel select.
>   * @ch_req_max: Maximum number of Tx or Rx channels available.
> @@ -95,6 +97,7 @@ struct tegra_adma_chip_data {
>  	unsigned int ch_req_max;
>  	unsigned int ch_reg_size;
>  	unsigned int nr_channels;
> +	bool has_outstanding_reqs;
>  };
>  
>  /*
> @@ -594,6 +597,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
>  			 ADMA_CH_CTRL_FLOWCTRL_EN;
>  	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
>  	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
> +	if (cdata->has_outstanding_reqs)
> +		ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8);
>  	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
>  	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
>  
> @@ -778,6 +783,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = {
>  	.ch_req_tx_shift	= 28,
>  	.ch_req_rx_shift	= 24,
>  	.ch_base_offset		= 0,
> +	.has_outstanding_reqs	= false,
>  	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
>  	.ch_req_mask		= 0xf,
>  	.ch_req_max		= 10,
> @@ -792,6 +798,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = {
>  	.ch_req_tx_shift	= 27,
>  	.ch_req_rx_shift	= 22,
>  	.ch_base_offset		= 0x10000,
> +	.has_outstanding_reqs	= true,
>  	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
>  	.ch_req_mask		= 0x1f,
>  	.ch_req_max		= 20,
> 

Acked-by: Jon Hunter <jonathanh@xxxxxxxxxx>

Cheers
Jon
-- 
nvpublic



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux