Re: [PATCH 3/3] ARM: allow kernel to be loaded in middle of phymem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 23, 2014 at 02:15:07PM -0500, Nicolas Pitre wrote:
> On Wed, 22 Jan 2014, Wang Nan wrote:
> 
> > This patch allows the kernel to be loaded at the middle of kernel awared
> > physical memory. Before this patch, users must use mem= or device tree to cheat
> > kernel about the start address of physical memory.
> > 
> > This feature is useful in some special cases, for example, building a crash
> > dump kernel. Without it, kernel command line, atag and devicetree must be
> > adjusted carefully, sometimes is impossible.
> 
> With CONFIG_PATCH_PHYS_VIRT the value for PHYS_OFFSET is determined 
> dynamically by rounding down the kernel image start address to the 
> previous 16MB boundary.  In the case of a crash kernel, this might be 
> cleaner to simply readjust __pv_phys_offset during early boot and call 
> fixup_pv_table(), and then reserve away the memory from the previous 
> kernel.  That will let you access that memory directly (with gdb for 
> example) and no pointer address translation will be required.

We already have support in the kernel to ignore memory below the calculated
PHYS_OFFSET.  See 571b14375019c3a66ef70d4d4a7083f4238aca30.

-- 
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]