From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx> commit fee6a8923ae0d318a7f7950c6c6c28a96cea099b upstream. When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx> Cc: linux-stable <stable@xxxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -592,16 +592,16 @@ static int peak_usb_ndo_stop(struct net_ dev->state &= ~PCAN_USB_STATE_STARTED; netif_stop_queue(netdev); + close_candev(netdev); + + dev->can.state = CAN_STATE_STOPPED; + /* unlink all pending urbs and free used memory */ peak_usb_unlink_all_urbs(dev); if (dev->adapter->dev_stop) dev->adapter->dev_stop(dev); - close_candev(netdev); - - dev->can.state = CAN_STATE_STOPPED; - /* can set bus off now */ if (dev->adapter->dev_set_bus) { int err = dev->adapter->dev_set_bus(dev, 0);