Re: [PATCH] iio: adc: max9611: Fix temperature reading in probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonathan, Jacopo,

On Mon, Aug 5, 2019 at 7:15 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On Mon,  5 Aug 2019 17:55:15 +0200
> Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote:
>
> > The max9611 driver reads the die temperature at probe time to validate
> > the communication channel. Use the actual read value to perform the test
> > instead of the read function return value, which was mistakenly used so
> > far.
> >
> > The temperature reading test was only successful because the 0 return
> > value is in the range of supported temperatures.
> >
> > Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver")
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>
> Applied to the fixes-togreg branch of iio.git and marked for
> stable.  That'll be a bit fiddly given other changes around this
> so we may need to do backports.

This is now commit b9ddd5091160793e ("iio: adc: max9611: Fix temperature
reading in probe") in v5.3-rc5, and has been backported to 4.14, 4.19,
and 5.2.

> > --- a/drivers/iio/adc/max9611.c
> > +++ b/drivers/iio/adc/max9611.c
> > @@ -480,7 +480,7 @@ static int max9611_init(struct max9611_dev *max9611)
> >       if (ret)
> >               return ret;
> >
> > -     regval = ret & MAX9611_TEMP_MASK;
> > +     regval &= MAX9611_TEMP_MASK;
> >
> >       if ((regval > MAX9611_TEMP_MAX_POS &&
> >            regval < MAX9611_TEMP_MIN_NEG) ||

While this did fix a bug, it also introduced a regression: on Salvator-XS,
which has two max9611 instances, I now see intermittent failures

    max9611 4-007c: Invalid value received from ADC 0x8000: aborting
    max9611: probe of 4-007c failed with error -5

and/or

    max9611 4-007f: Invalid value received from ADC 0x8000: aborting
    max9611: probe of 4-007f failed with error -5

during boot.

Retrying on failure fixes the issue, e.g.:

    max9611_init:483: regval = 0x8000
    max9611 4-007f: Invalid value received from ADC 0x8000: aborting
    max9611_init:483: regval = 0x2780

According to the datasheet, 0x8000 is the Power-On Reset value.
Looks like it should be ignored, and retried?

Gr{oetje,eeting}s,

                        Geert


--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux