when the battery is set to sbs-mode and no gpio detection is enabled
"health" is always returning a value even when the battery is not present.
All other fields return "not present".
This leads to a scenario where the driver is constantly switching between
"present" and "not present" state. This generates a lot of constant
traffic on the i2c.
This commit changes the response of "health" to an error when the battery
is not responding leading to a consistent "not present" state.
Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume
MANUFACTURER_DATA formats")
Signed-off-by: Michael Nosthoff <committed@xxxxxxxx>
Cc: Brian Norris <briannorris@xxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
drivers/power/supply/sbs-battery.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index 2e86cc1e0e35..f8d74e9f7931 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -314,17 +314,22 @@ static int sbs_get_battery_presence_and_health(
{
int ret;
- if (psp == POWER_SUPPLY_PROP_PRESENT) {
- /* Dummy command; if it succeeds, battery is present. */
- ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
- if (ret < 0)
- val->intval = 0; /* battery disconnected */
- else
- val->intval = 1; /* battery present */
- } else { /* POWER_SUPPLY_PROP_HEALTH */
+ /* Dummy command; if it succeeds, battery is present. */
+ ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+ if (ret < 0) { /* battery not present*/
+ if (psp == POWER_SUPPLY_PROP_PRESENT) {
+ val->intval = 0;
+ return 0;
+ }
+ return ret;
+ }
+
+ if (psp == POWER_SUPPLY_PROP_PRESENT)
+ val->intval = 1; /* battery present */
+ else /* POWER_SUPPLY_PROP_HEALTH */
/* SBS spec doesn't have a general health command. */
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
- }
return 0;
}
@@ -626,6 +631,8 @@ static int sbs_get_property(struct power_supply *psy,
else
ret = sbs_get_battery_presence_and_health(client, psp,
val);
+
+ /* this can only be true if no gpio is used */
if (psp == POWER_SUPPLY_PROP_PRESENT)
return 0;
break;
--
2.20.1
