FAILED: patch "[PATCH] bcache: Revert "bcache: use sysfs_match_string() instead of" failed to apply to 5.2-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 5.2-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 20621fedb2a696e4dc60bc1c5de37cf21976abcb Mon Sep 17 00:00:00 2001
From: Coly Li <colyli@xxxxxxx>
Date: Fri, 9 Aug 2019 14:14:05 +0800
Subject: [PATCH] bcache: Revert "bcache: use sysfs_match_string() instead of
 __sysfs_match_string()"

This reverts commit 89e0341af082dbc170019f908846f4a424efc86b.

In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at
the end of list is necessary. Remove the NULL from last element of each
lists will cause the following panic,

[ 4340.455652] bcache: register_cache() registered cache device nvme0n1
[ 4340.464603] bcache: register_bdev() registered backing device sdk
[ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already
[ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6
[ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI
[ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4
[ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019
[ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000
[ 5139.248021] RIP: 0010:string+0x21/0x70
[ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286
[ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04
[ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff
[ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a
[ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48
[ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855
[ 5139.248119] FS:  00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000
[ 5139.248137] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0
[ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5139.248193] PKRU: 55555554
[ 5139.248200] Call Trace:
[ 5139.248210]  vsnprintf+0x1fb/0x510
[ 5139.248221]  snprintf+0x39/0x40
[ 5139.248238]  bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache]
[ 5139.248256]  __bch_cached_dev_show+0x44d/0x5f0 [bcache]
[ 5139.248270]  ? __alloc_pages_nodemask+0xb2/0x210
[ 5139.248284]  bch_cached_dev_show+0x2c/0x50 [bcache]
[ 5139.248297]  sysfs_kf_seq_show+0xbb/0x190
[ 5139.248308]  seq_read+0xfc/0x3c0
[ 5139.248317]  __vfs_read+0x26/0x140
[ 5139.248327]  vfs_read+0x87/0x130
[ 5139.248336]  SyS_read+0x42/0x90
[ 5139.248346]  do_syscall_64+0x74/0x160
[ 5139.248358]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 5139.248370] RIP: 0033:0x7faf24eea370
[ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370
[ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003
[ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000
[ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000
[ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff
[ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e

The simplest way to fix is to revert commit 89e0341af082 ("bcache: use
sysfs_match_string() instead of __sysfs_match_string()").

This bug was introduced in Linux v5.2, so this fix only applies to
Linux v5.2 is enough for stable tree maintainer.

Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()")
Cc: stable@xxxxxxxxxxxxxxx
Cc: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
Reported-by: Peifeng Lin <pflin@xxxxxxxx>
Acked-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
Signed-off-by: Coly Li <colyli@xxxxxxx>
Signed-off-by: Jens Axboe <axboe@xxxxxxxxx>

diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index 9f0826712845..e2059af90791 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -23,24 +23,28 @@ static const char * const bch_cache_modes[] = {
 	"writethrough",
 	"writeback",
 	"writearound",
-	"none"
+	"none",
+	NULL
 };
 
 /* Default is 0 ("auto") */
 static const char * const bch_stop_on_failure_modes[] = {
 	"auto",
-	"always"
+	"always",
+	NULL
 };
 
 static const char * const cache_replacement_policies[] = {
 	"lru",
 	"fifo",
-	"random"
+	"random",
+	NULL
 };
 
 static const char * const error_actions[] = {
 	"unregister",
-	"panic"
+	"panic",
+	NULL
 };
 
 write_attribute(attach);
@@ -338,7 +342,7 @@ STORE(__cached_dev)
 	}
 
 	if (attr == &sysfs_cache_mode) {
-		v = sysfs_match_string(bch_cache_modes, buf);
+		v = __sysfs_match_string(bch_cache_modes, -1, buf);
 		if (v < 0)
 			return v;
 
@@ -349,7 +353,7 @@ STORE(__cached_dev)
 	}
 
 	if (attr == &sysfs_stop_when_cache_set_failed) {
-		v = sysfs_match_string(bch_stop_on_failure_modes, buf);
+		v = __sysfs_match_string(bch_stop_on_failure_modes, -1, buf);
 		if (v < 0)
 			return v;
 
@@ -816,7 +820,7 @@ STORE(__bch_cache_set)
 			    0, UINT_MAX);
 
 	if (attr == &sysfs_errors) {
-		v = sysfs_match_string(error_actions, buf);
+		v = __sysfs_match_string(error_actions, -1, buf);
 		if (v < 0)
 			return v;
 
@@ -1088,7 +1092,7 @@ STORE(__bch_cache)
 	}
 
 	if (attr == &sysfs_cache_replacement_policy) {
-		v = sysfs_match_string(cache_replacement_policies, buf);
+		v = __sysfs_match_string(cache_replacement_policies, -1, buf);
 		if (v < 0)
 			return v;
 




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux