Re: [Intel-gfx] [PATCH 3/3] drm/i915: Flush extra hard after writing relocations through the GTT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 30, 2019 at 12:21:51PM +0100, Chris Wilson wrote:
> Recently discovered in commit bdae33b8b82b ("drm/i915: Use maximum write
> flush for pwrite_gtt") was that we needed to our full write barrier
> before changing the GGTT PTE to ensure that our indirect writes through
> the GTT landed before the PTE changed (and the writes end up in a
> different page). That also applies to our GGTT relocation path.

Chris,

As i understand, changing the GGTT PTE also an indirect write. If so, isn't a wmb()
should be good enough.

Thanks,
Prathap
> 
> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
>  drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
> index 8a2047c4e7c3..01901dad33f7 100644
> --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
> +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c
> @@ -1019,11 +1019,12 @@ static void reloc_cache_reset(struct reloc_cache *cache)
>  		kunmap_atomic(vaddr);
>  		i915_gem_object_finish_access((struct drm_i915_gem_object *)cache->node.mm);
>  	} else {
> -		wmb();
> +		struct i915_ggtt *ggtt = cache_to_ggtt(cache);
> +
> +		intel_gt_flush_ggtt_writes(ggtt->vm.gt);
>  		io_mapping_unmap_atomic((void __iomem *)vaddr);
> -		if (cache->node.allocated) {
> -			struct i915_ggtt *ggtt = cache_to_ggtt(cache);
>  
> +		if (cache->node.allocated) {
>  			ggtt->vm.clear_range(&ggtt->vm,
>  					     cache->node.start,
>  					     cache->node.size);
> @@ -1078,6 +1079,7 @@ static void *reloc_iomap(struct drm_i915_gem_object *obj,
>  	void *vaddr;
>  
>  	if (cache->vaddr) {
> +		intel_gt_flush_ggtt_writes(ggtt->vm.gt);
>  		io_mapping_unmap_atomic((void __force __iomem *) unmask_page(cache->vaddr));
>  	} else {
>  		struct i915_vma *vma;
> @@ -1119,7 +1121,6 @@ static void *reloc_iomap(struct drm_i915_gem_object *obj,
>  
>  	offset = cache->node.start;
>  	if (cache->node.allocated) {
> -		wmb();
>  		ggtt->vm.insert_page(&ggtt->vm,
>  				     i915_gem_object_get_dma_address(obj, page),
>  				     offset, I915_CACHE_NONE, 0);
> -- 
> 2.22.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux