[ Upstream commit 6c0ed66f1a5b84e2a812c7c2d6571a5621bf3396 ]
rtl_usb_probe() must do error handle rtl_deinit_core() only if
rtl_init_core() is done, otherwise goto error_out2.
| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
| rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl8192cu: Chip version 0x10
| rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl_usb: Too few input end points found
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
| Google 01/01/2011
| Workqueue: usb_hub_wq hub_event
| Call Trace:
| __dump_stack lib/dump_stack.c:77 [inline]
| dump_stack+0xe8/0x16e lib/dump_stack.c:113
| assign_lock_key kernel/locking/lockdep.c:786 [inline]
| register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
| __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
| lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
| __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
| _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
| rtl_c2hcmd_launcher+0xd1/0x390
| drivers/net/wireless/realtek/rtlwifi/base.c:2344
| rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574
| rtl_usb_probe.cold+0x861/0xa70
| drivers/net/wireless/realtek/rtlwifi/usb.c:1093
| usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
| really_probe+0x2da/0xb10 drivers/base/dd.c:509
| driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
| __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
| bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
| __device_attach+0x223/0x3a0 drivers/base/dd.c:844
| bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
| device_add+0xad2/0x16e0 drivers/base/core.c:2106
| usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
| generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
| usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
| really_probe+0x2da/0xb10 drivers/base/dd.c:509
| driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
| __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
| bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
| __device_attach+0x223/0x3a0 drivers/base/dd.c:844
| bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
| device_add+0xad2/0x16e0 drivers/base/core.c:2106
| usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
| hub_port_connect drivers/usb/core/hub.c:5089 [inline]
| hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
| port_event drivers/usb/core/hub.c:5350 [inline]
| hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
| process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
| worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
| kthread+0x313/0x420 kernel/kthread.c:253
| ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Reported-by: syzbot+1fcc5ef45175fc774231@xxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Acked-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/usb.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 820c42ff5384..2401c8bdb211 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1099,13 +1099,13 @@ int rtl_usb_probe(struct usb_interface *intf,
rtlpriv->cfg->ops->read_eeprom_info(hw);
err = _rtl_usb_init(hw);
if (err)
- goto error_out;
+ goto error_out2;
rtl_usb_init_sw(hw);
/* Init mac80211 sw */
err = rtl_init_core(hw);
if (err) {
pr_err("Can't allocate sw for mac80211\n");
- goto error_out;
+ goto error_out2;
}
if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
pr_err("Can't init_sw_vars\n");
@@ -1126,6 +1126,7 @@ int rtl_usb_probe(struct usb_interface *intf,
error_out:
rtl_deinit_core(hw);
+error_out2:
_rtl_usb_io_handler_release(hw);
usb_put_dev(udev);
complete(&rtlpriv->firmware_loading_complete);
--
2.20.1
