[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ] Some transceivers may comply with SFF-8472 but not implement the Digital Diagnostic Monitoring (DDM) interface described in it. The existence of such area is specified by bit 6 of byte 92, set to 1 if implemented. Currently, due to not checking this bit ixgbe fails trying to read SFP module's eeprom with the follow message: ethtool -m enP51p1s0f0 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it was assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom data was confirmed by Mellanox as correct and present in other Passive DACs in from other manufacturers. Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@xxxxxxxxxxxxxxxxxx> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@xxxxxxxxx> Tested-by: Andrew Bowers <andrewx.bowers@xxxxxxxxx> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index c3e7a8191128..f7e68083200c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -3237,7 +3237,8 @@ static int ixgbe_get_module_info(struct net_device *dev, page_swap = true; } - if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) { + if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap || + !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) { /* We have a SFP, but it does not support SFF-8472 */ modinfo->type = ETH_MODULE_SFF_8079; modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index b0cac961df3b..94df1d99be95 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -70,6 +70,7 @@ #define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 #define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 +#define IXGBE_SFF_DDM_IMPLEMENTED 0x40 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8 #define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23 -- 2.20.1