From: Andrew Lunn <andrew@xxxxxxx>
[ Upstream commit 0cea0e1148fe134a4a3aaf0b1496f09241fb943a ]
The RX power read from the SFP uses units of 0.1uW. This must be
scaled to units of uW for HWMON. This requires a divide by 10, not the
current 100.
With this change in place, sensors(1) and ethtool -m agree:
sff2-isa-0000
Adapter: ISA adapter
in0: +3.23 V
temp1: +33.1 C
power1: 270.00 uW
power2: 200.00 uW
curr1: +0.01 A
Laser output power : 0.2743 mW / -5.62 dBm
Receiver signal average optical power : 0.2014 mW / -6.96 dBm
Reported-by: chris.healy@xxxxxxxx
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/sfp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -514,7 +514,7 @@ static int sfp_hwmon_read_sensor(struct
static void sfp_hwmon_to_rx_power(long *value)
{
- *value = DIV_ROUND_CLOSEST(*value, 100);
+ *value = DIV_ROUND_CLOSEST(*value, 10);
}
static void sfp_hwmon_calibrate(struct sfp *sfp, unsigned int slope, int offset,
