Patch "tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0" has been added to the 3.4-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0

to the 3.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     tg3-initialize-reg_base_addr-at-pci-config-offset-120-to-0.patch
and it can be found in the queue-3.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From foo@baz Mon Jan 13 09:28:30 PST 2014
From: Nat Gurumoorthy <natg@xxxxxxxxxx>
Date: Mon, 9 Dec 2013 10:43:21 -0800
Subject: tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0

From: Nat Gurumoorthy <natg@xxxxxxxxxx>

[ Upstream commit 388d3335575f4c056dcf7138a30f1454e2145cd8 ]

The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120)
uninitialized. From power on reset this register may have garbage in it. The
Register Base Address register defines the device local address of a
register. The data pointed to by this location is read or written using
the Register Data register (PCI config offset 128). When REG_BASE_ADDR has
garbage any read or write of Register Data Register (PCI 128) will cause the
PCI bus to lock up. The TCO watchdog will fire and bring down the system.

Signed-off-by: Nat Gurumoorthy <natg@xxxxxxxxxx>
Acked-by: Michael Chan <mchan@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/broadcom/tg3.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14671,6 +14671,9 @@ static int __devinit tg3_get_invariants(
 	/* Clear this out for sanity. */
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
+	/* Clear TG3PCI_REG_BASE_ADDR to prevent hangs. */
+	tw32(TG3PCI_REG_BASE_ADDR, 0);
+
 	pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
 			      &pci_state_reg);
 	if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 &&


Patches currently in stable-queue which might be from natg@xxxxxxxxxx are

queue-3.4/tg3-initialize-reg_base_addr-at-pci-config-offset-120-to-0.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]