[ Upstream commit 44d34af2e4cfd0c5357182f8b43f3e0a1fe30a2e ] Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3491 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@xxxxxxxxxxxx> Signed-off-by: Marcel Holtmann <marcel@xxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 50aed5259c2b..21fa5c889857 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -264,6 +264,7 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME }, + { USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME }, { USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME }, /* Broadcom BCM2035 */ -- 2.20.1