From: Konstantin Khlebnikov <khlebnikov@xxxxxxxxxxxxxx> commit caff422ea81e144842bc44bab408d85ac449377b upstream. This reverts commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61. That change cased false-positive warning about hardware hang: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang: TDH <0> TDT <1> next_to_use <1> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <fffba7a7> next_to_watch <0> jiffies <fffbb140> next_to_watch.status <0> MAC Status <40080080> PHY Status <7949> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Besides warning everything works fine. Original issue will be fixed property in following patch. Signed-off-by: Konstantin Khlebnikov <khlebnikov@xxxxxxxxxxxxxx> Reported-by: Joseph Yasi <joe.yasi@xxxxxxxxx> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175 Tested-by: Joseph Yasi <joe.yasi@xxxxxxxxx> Tested-by: Aaron Brown <aaron.f.brown@xxxxxxxxx> Tested-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxx> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5291,13 +5291,8 @@ static void e1000_watchdog_task(struct w /* 8000ES2LAN requires a Rx packet buffer work-around * on link down event; reset the controller to flush * the Rx packet buffer. - * - * If the link is lost the controller stops DMA, but - * if there is queued Tx work it cannot be done. So - * reset the controller to flush the Tx packet buffers. */ - if ((adapter->flags & FLAG_RX_NEEDS_RESTART) || - e1000_desc_unused(tx_ring) + 1 < tx_ring->count) + if (adapter->flags & FLAG_RX_NEEDS_RESTART) adapter->flags |= FLAG_RESTART_NOW; else pm_schedule_suspend(netdev->dev.parent, @@ -5320,6 +5315,14 @@ link_up: adapter->gotc_old = adapter->stats.gotc; spin_unlock(&adapter->stats64_lock); + /* If the link is lost the controller stops DMA, but + * if there is queued Tx work it cannot be done. So + * reset the controller to flush the Tx packet buffers. + */ + if (!netif_carrier_ok(netdev) && + (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) + adapter->flags |= FLAG_RESTART_NOW; + /* If reset is necessary, do it outside of interrupt context. */ if (adapter->flags & FLAG_RESTART_NOW) { schedule_work(&adapter->reset_task);
