Re: [PATCH v2] dmaengine: imx-sdma: remove BD_INTR for channel0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21-06-19, 16:23, yibin.gong@xxxxxxx wrote:
> From: Robin Gong <yibin.gong@xxxxxxx>
> 
> It is possible for an irq triggered by channel0 to be received later
> after clks are disabled once firmware loaded during sdma probe. If
> that happens then clearing them by writing to SDMA_H_INTR won't work
> and the kernel will hang processing infinite interrupts. Actually,
> don't need interrupt triggered on channel0 since it's pollling
> SDMA_H_STATSTOP to know channel0 done rather than interrupt in
> current code, just clear BD_INTR to disable channel0 interrupt to
> avoid the above case.
> This issue was brought by commit 1d069bfa3c78 ("dmaengine: imx-sdma:
> ack channel 0 IRQ in the interrupt handler") which didn't take care
> the above case.

Applied, thanks

-- 
~Vinod



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux