On Thu, Jun 27, 2019 at 10:16:17AM +0100, Suzuki K Poulose wrote: > Hi Andrew, > > On 27/06/2019 09:35, Andrew Murray wrote: > > Synchronization is recommended before disabling the trace registers > > to prevent any start or stop points being speculative at the point > > of disabling the unit (section 7.3.77 of ARM IHI 0064D). > > > > Synchronization is also recommended after programming the trace > > registers to ensure all updates are committed prior to normal code > > resuming (section 4.3.7 of ARM IHI 0064D). > > > > Let's ensure these syncronization points are present in the code > > and clearly commented. > > Please could you also mention why we switched from mb() ? No problem. > > > > > Note that we could rely on the barriers in CS_LOCK and > > coresight_disclaim_device_unlocked or the context switch to user > > space - however coresight may be of use in the kernel. > > > > Signed-off-by: Andrew Murray <andrew.murray@xxxxxxx> > > CC: stable@xxxxxxxxxxxxxxx > > > > > --- > > drivers/hwtracing/coresight/coresight-etm4x.c | 7 ++++++- > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c > > index c89190d464ab..68e8e3954cef 100644 > > --- a/drivers/hwtracing/coresight/coresight-etm4x.c > > +++ b/drivers/hwtracing/coresight/coresight-etm4x.c > > @@ -188,6 +188,10 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata) > > dev_err(etm_dev, > > "timeout while waiting for Idle Trace Status\n"); > > + /* As recommended by 4.3.7 of ARM IHI 0064D */ > > nit: It would be good to mention the "section name" to help the reader > find the same on a different version of the document. Also within the same > version, this is listed in the subsection: > "Synchronization when using the memory-mapped interface" > > Please could you update the comment to reflect the same ? > Yes sure. > > + dsb(sy); > > + isb(); > > + > > done: > > CS_LOCK(drvdata->base); > > @@ -454,7 +458,8 @@ static void etm4_disable_hw(void *info) > > control &= ~0x1; > > /* make sure everything completes before disabling */ > > - mb(); > > + /* As recommended by 7.3.77 of ARM IHI 0064D */ > > Nit: This refers to completely unrelated section. Shouldn't this be the same > as above ? Actually 4.3.7 relates to using dsb/isb after programming the trace unit registers and indicates this is to 'ensure that all updates are committed to the trace unit before normal code execution resumes'. Whereas 7.3.77 (hidden awawy in the SSTATUS description) relates to using dsb/isb before disabling the trace unit to 'prevent any start or stop points being specualtive at the point of disabling the trace unit'. Both sections suggest the same course of action - however I felt that the description in 7.3.77 better related to the context of etm4_disable_hw. Perhaps if I also add the section name, readers are more likely to find this text? > > With the above fixed: > > Reviewed-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx> Thanks, Andrew Murray
