[ Upstream commit da38ef3ed10a09248e13ae16530c2c6d448dc47d ]
We are currently assuming all GPIOs are non-wakeup capable GPIOs as we
not configuring the bank->non_wakeup_gpios like we used to earlier with
platform_data.
Let's add omap_gpio_is_off_wakeup_capable() to make the handling clearer
while considering that later patches may want to configure SoC specific
bank->non_wakeup_gpios for the GPIOs in wakeup domain.
Cc: Aaro Koskinen <aaro.koskinen@xxxxxx>
Cc: Grygorii Strashko <grygorii.strashko@xxxxxx>
Cc: Keerthy <j-keerthy@xxxxxx>
Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Cc: Tero Kristo <t-kristo@xxxxxx>
Reported-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpio/gpio-omap.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 9943273ec981..c8c49b1d5f9f 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -292,6 +292,22 @@ static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
}
}
+/*
+ * Off mode wake-up capable GPIOs in bank(s) that are in the wakeup domain.
+ * See TRM section for GPIO for "Wake-Up Generation" for the list of GPIOs
+ * in wakeup domain. If bank->non_wakeup_gpios is not configured, assume none
+ * are capable waking up the system from off mode.
+ */
+static bool omap_gpio_is_off_wakeup_capable(struct gpio_bank *bank, u32 gpio_mask)
+{
+ u32 no_wake = bank->non_wakeup_gpios;
+
+ if (no_wake)
+ return !!(~no_wake & gpio_mask);
+
+ return false;
+}
+
static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
unsigned trigger)
{
@@ -323,13 +339,7 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
}
/* This part needs to be executed always for OMAP{34xx, 44xx} */
- if (!bank->regs->irqctrl) {
- /* On omap24xx proceed only when valid GPIO bit is set */
- if (bank->non_wakeup_gpios) {
- if (!(bank->non_wakeup_gpios & gpio_bit))
- goto exit;
- }
-
+ if (!bank->regs->irqctrl && !omap_gpio_is_off_wakeup_capable(bank, gpio)) {
/*
* Log the edge gpio and manually trigger the IRQ
* after resume if the input level changes
@@ -342,7 +352,6 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
-exit:
bank->level_mask =
readl_relaxed(bank->base + bank->regs->leveldetect0) |
readl_relaxed(bank->base + bank->regs->leveldetect1);
--
2.20.1
