[PATCH 5.1 19/98] net: mvpp2: prs: Fix parser range for VID filtering

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>

[ Upstream commit 46b0090a6636cf34c0e856f15dd03e15ba4cdda6 ]

VID filtering is implemented in the Header Parser, with one range of 11
vids being assigned for each no-loopback port.

Make sure we use the per-port range when looking for existing entries in
the Parser.

Since we used a global range instead of a per-port one, this causes VIDs
to be removed from the whitelist from all ports of the same PPv2
instance.

Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering")
Suggested-by: Yuri Chipchev <yuric@xxxxxxxxxxx>
Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c |   17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -1905,8 +1905,7 @@ static int mvpp2_prs_ip6_init(struct mvp
 }
 
 /* Find tcam entry with matched pair <vid,port> */
-static int mvpp2_prs_vid_range_find(struct mvpp2 *priv, int pmap, u16 vid,
-				    u16 mask)
+static int mvpp2_prs_vid_range_find(struct mvpp2_port *port, u16 vid, u16 mask)
 {
 	unsigned char byte[2], enable[2];
 	struct mvpp2_prs_entry pe;
@@ -1914,13 +1913,13 @@ static int mvpp2_prs_vid_range_find(stru
 	int tid;
 
 	/* Go through the all entries with MVPP2_PRS_LU_VID */
-	for (tid = MVPP2_PE_VID_FILT_RANGE_START;
-	     tid <= MVPP2_PE_VID_FILT_RANGE_END; tid++) {
-		if (!priv->prs_shadow[tid].valid ||
-		    priv->prs_shadow[tid].lu != MVPP2_PRS_LU_VID)
+	for (tid = MVPP2_PRS_VID_PORT_FIRST(port->id);
+	     tid <= MVPP2_PRS_VID_PORT_LAST(port->id); tid++) {
+		if (!port->priv->prs_shadow[tid].valid ||
+		    port->priv->prs_shadow[tid].lu != MVPP2_PRS_LU_VID)
 			continue;
 
-		mvpp2_prs_init_from_hw(priv, &pe, tid);
+		mvpp2_prs_init_from_hw(port->priv, &pe, tid);
 
 		mvpp2_prs_tcam_data_byte_get(&pe, 2, &byte[0], &enable[0]);
 		mvpp2_prs_tcam_data_byte_get(&pe, 3, &byte[1], &enable[1]);
@@ -1950,7 +1949,7 @@ int mvpp2_prs_vid_entry_add(struct mvpp2
 	memset(&pe, 0, sizeof(pe));
 
 	/* Scan TCAM and see if entry with this <vid,port> already exist */
-	tid = mvpp2_prs_vid_range_find(priv, (1 << port->id), vid, mask);
+	tid = mvpp2_prs_vid_range_find(port, vid, mask);
 
 	reg_val = mvpp2_read(priv, MVPP2_MH_REG(port->id));
 	if (reg_val & MVPP2_DSA_EXTENDED)
@@ -2008,7 +2007,7 @@ void mvpp2_prs_vid_entry_remove(struct m
 	int tid;
 
 	/* Scan TCAM and see if entry with this <vid,port> already exist */
-	tid = mvpp2_prs_vid_range_find(priv, (1 << port->id), vid, 0xfff);
+	tid = mvpp2_prs_vid_range_find(port, vid, 0xfff);
 
 	/* No such entry */
 	if (tid < 0)





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux