On Thu, Jun 20, 2019 at 09:17:02AM +0100, Jon Hunter wrote:
> There are a few issues with the GPU regulator defined for Jetson Nano
> which are:
>
> 1. The GPU regulator is a PWM based regulator and not a fixed voltage
> regulator.
> 2. The output voltages for the GPU regulator are not correct.
> 3. The regulator enable ramp delay is too short for the regulator and
> needs to be increased. 2ms should be sufficient.
> 4. This is the same regulator used on Jetson TX1 and so make the ramp
> delay and settling time the same as Jetson TX1.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
> ---
> .../boot/dts/nvidia/tegra210-p3450-0000.dts | 21 +++++++++++--------
> 1 file changed, 12 insertions(+), 9 deletions(-)
Applied to for-5.3/arm64/dt and added the following Fixes: line:
Fixes: 6772cd0eacc8 ("arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support")
Thanks,
Thierry
Attachment:
signature.asc
Description: PGP signature
