Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 5752b50477da - Linux 5.1.12
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 5752b50477da - Linux 5.1.12
We then merged the patchset with `git am`:
netfilter-nat-fix-udp-checksum-corruption.patch
ax25-fix-inconsistent-lock-state-in-ax25_destroy_timer.patch
be2net-fix-number-of-rx-queues-used-for-flow-hashing.patch
hv_netvsc-set-probe-mode-to-sync.patch
ipv6-flowlabel-fl6_sock_lookup-must-use-atomic_inc_not_zero.patch
lapb-fixed-leak-of-control-blocks.patch
neigh-fix-use-after-free-read-in-pneigh_get_next.patch
net-dsa-rtl8366-fix-up-vlan-filtering.patch
net-openvswitch-do-not-free-vport-if-register_netdevice-is-failed.patch
net-phylink-set-the-autoneg-state-in-phylink_phy_change.patch
net-tls-correctly-account-for-copied-bytes-with-multiple-sk_msgs.patch
nfc-ensure-presence-of-required-attributes-in-the-deactivate_target-handler.patch
sctp-free-cookie-before-we-memdup-a-new-one.patch
sunhv-fix-device-naming-inconsistency-between-sunhv_console-and-sunhv_reg.patch
tipc-purge-deferredq-list-for-each-grp-member-in-tipc_group_delete.patch
vsock-virtio-set-sock_done-on-peer-shutdown.patch
net-mlx5-avoid-reloading-already-removed-devices.patch
vxlan-don-t-assume-linear-buffers-in-error-handler.patch
geneve-don-t-assume-linear-buffers-in-error-handler.patch
net-mvpp2-prs-fix-parser-range-for-vid-filtering.patch
net-mvpp2-prs-use-the-correct-helpers-when-removing-all-vid-filters.patch
net-dsa-microchip-don-t-try-to-read-stats-for-unused-ports.patch
net-ethtool-allow-matching-on-vlan-dei-bit.patch
net-mlx5-update-pci-error-handler-entries-and-command-translation.patch
mlxsw-spectrum_router-refresh-nexthop-neighbour-when-it-becomes-dead.patch
net-mlx5e-add-ndo_set_feature-for-uplink-representor.patch
mlxsw-spectrum_flower-fix-tos-matching.patch
net-mlx5e-fix-source-port-matching-in-fdb-peer-flow-rule.patch
mlxsw-spectrum_buffers-reduce-pool-size-on-spectrum-2.patch
net-mlx5e-support-tagged-tunnel-over-bond.patch
net-correct-udp-zerocopy-refcnt-also-when-zerocopy-only-on-append.patch
net-mlx5e-avoid-detaching-non-existing-netdev-under-switchdev-mode.patch
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aarch64-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.config
kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aarch64-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.tar.gz
ppc64le:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-ppc64le-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.config
kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-ppc64le-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.tar.gz
s390x:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390x-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.config
kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390x-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.tar.gz
x86_64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86_64-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.config
kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86_64-2d9aba1d7f5d26d4a54061aff940cfe939b4c832.tar.gz
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ AMTU (Abstract Machine Test Utility) [3]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
🚧 ✅ Networking socket: fuzz [8]
🚧 ✅ Networking sctp-auth: sockopts test [9]
🚧 ✅ Networking tunnel: vxlan basic [10]
🚧 ✅ Networking tunnel: geneve basic test [11]
🚧 ✅ tuned: tune-processes-through-perf [12]
ppc64le:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ AMTU (Abstract Machine Test Utility) [3]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
🚧 ✅ Networking socket: fuzz [8]
🚧 ✅ Networking sctp-auth: sockopts test [9]
🚧 ✅ Networking tunnel: vxlan basic [10]
🚧 ✅ Networking tunnel: geneve basic test [11]
🚧 ✅ tuned: tune-processes-through-perf [12]
s390x:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
🚧 ✅ Networking socket: fuzz [8]
🚧 ✅ Networking sctp-auth: sockopts test [9]
🚧 ✅ Networking tunnel: vxlan basic [10]
🚧 ✅ Networking tunnel: geneve basic test [11]
🚧 ✅ tuned: tune-processes-through-perf [12]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
x86_64:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ AMTU (Abstract Machine Test Utility) [3]
✅ Ethernet drivers sanity [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
🚧 ✅ Networking socket: fuzz [8]
🚧 ✅ Networking sctp-auth: sockopts test [9]
🚧 ✅ Networking tunnel: vxlan basic [10]
🚧 ✅ Networking tunnel: geneve basic test [11]
🚧 ✅ tuned: tune-processes-through-perf [12]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/driver/sanity
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/socket/fuzz
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/sctp/auth/sockopts
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/tunnel/vxlan/basic
[11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/tunnel/geneve/basic
[12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
Waived tests (marked with 🚧)
-----------------------------
This test run included waived tests. Such tests are executed but their results
are not taken into account. Tests are waived when their results are not
reliable enough, e.g. when they're just introduced or are being fixed.
