Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 7aa823a959e1 - Linux 4.19.51
The results of these automated tests are provided below.
Overall result: FAILED (see details below)
Merge: OK
Compile: OK
Tests: FAILED
One or more kernel tests failed:
aarch64:
❎ tuned: tune-processes-through-perf
ppc64le:
❎ tuned: tune-processes-through-perf
s390x:
❎ tuned: tune-processes-through-perf
x86_64:
❎ tuned: tune-processes-through-perf
We hope that these logs can help you find the problem quickly. For the full
detail on our testing procedures, please scroll to the bottom of this message.
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: 7aa823a959e1 - Linux 4.19.51
We then merged the patchset with `git am`:
drm-nouveau-add-kconfig-option-to-turn-off-nouveau-legacy-contexts.-v3.patch
nouveau-fix-build-with-config_nouveau_legacy_ctx_support-disabled.patch
hid-multitouch-handle-faulty-elo-touch-device.patch
hid-wacom-don-t-set-tool-type-until-we-re-in-range.patch
hid-wacom-don-t-report-anything-prior-to-the-tool-entering-range.patch
hid-wacom-send-btn_touch-in-response-to-intuosp2_bt-eraser-contact.patch
hid-wacom-correct-button-numbering-2nd-gen-intuos-pro-over-bluetooth.patch
hid-wacom-sync-intuosp2_bt-touch-state-after-each-frame-if-necessary.patch
revert-alsa-hda-realtek-improve-the-headset-mic-for-acer-aspire-laptops.patch
alsa-oxfw-allow-pcm-capture-for-stanton-scs.1m.patch
alsa-hda-realtek-update-headset-mode-for-alc256.patch
alsa-firewire-motu-fix-destruction-of-data-for-isochronous-resources.patch
libata-extend-quirks-for-the-st1000lm024-drives-with-nolpm-quirk.patch
mm-list_lru.c-fix-memory-leak-in-__memcg_init_list_lru_node.patch
fs-ocfs2-fix-race-in-ocfs2_dentry_attach_lock.patch
mm-vmscan.c-fix-trying-to-reclaim-unevictable-lru-page.patch
signal-ptrace-don-t-leak-unitialized-kernel-memory-with-ptrace_peek_siginfo.patch
ptrace-restore-smp_rmb-in-__ptrace_may_access.patch
iommu-arm-smmu-avoid-constant-zero-in-tlbi-writes.patch
i2c-acorn-fix-i2c-warning.patch
bcache-fix-stack-corruption-by-preceding_key.patch
bcache-only-set-bcache_dev_wb_running-when-cached-device-attached.patch
cgroup-use-css_tryget-instead-of-css_tryget_online-in-task_get_css.patch
asoc-cs42xx8-add-regcache-mask-dirty.patch
asoc-fsl_asrc-fix-the-issue-about-unsupported-rate.patch
drm-i915-sdvo-implement-proper-hdmi-audio-support-for-sdvo.patch
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aarch64-3545b8c93e947e1224a5062e05e13c160caac7d9.config
kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aarch64-3545b8c93e947e1224a5062e05e13c160caac7d9.tar.gz
ppc64le:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-ppc64le-3545b8c93e947e1224a5062e05e13c160caac7d9.config
kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-ppc64le-3545b8c93e947e1224a5062e05e13c160caac7d9.tar.gz
s390x:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390x-3545b8c93e947e1224a5062e05e13c160caac7d9.config
kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390x-3545b8c93e947e1224a5062e05e13c160caac7d9.tar.gz
x86_64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86_64-3545b8c93e947e1224a5062e05e13c160caac7d9.config
kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86_64-3545b8c93e947e1224a5062e05e13c160caac7d9.tar.gz
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
❎ tuned: tune-processes-through-perf [8]
✅ Usex - version 1.9-29 [9]
🚧 ✅ storage: software RAID testing [10]
ppc64le:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
❎ tuned: tune-processes-through-perf [8]
✅ Usex - version 1.9-29 [9]
🚧 ✅ storage: software RAID testing [10]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
s390x:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
❎ tuned: tune-processes-through-perf [8]
🚧 ✅ storage: software RAID testing [10]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
x86_64:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ audit: audit testsuite test [5]
✅ httpd: mod_ssl smoke sanity [6]
✅ iotop: sanity [7]
❎ tuned: tune-processes-through-perf [8]
✅ Usex - version 1.9-29 [9]
🚧 ✅ storage: software RAID testing [10]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/loopdev/sanity
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/usex/1.9-29
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/swraid/trim
Waived tests (marked with 🚧)
-----------------------------
This test run included waived tests. Such tests are executed but their results
are not taken into account. Tests are waived when their results are not
reliable enough, e.g. when they're just introduced or are being fixed.
