Hello,
We ran automated tests on a patchset that was proposed for merging into this
kernel tree. The patches were applied to:
Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: bb7b450e61a1 - Linux 4.19.49
The results of these automated tests are provided below.
Overall result: PASSED
Merge: OK
Compile: OK
Tests: OK
Please reply to this email if you have any questions about the tests that we
ran or if you have any suggestions on how to make future tests more effective.
,-. ,-.
( C ) ( K ) Continuous
`-',-.`-' Kernel
( I ) Integration
`-'
______________________________________________________________________________
Merge testing
-------------
We cloned this repository and checked out the following commit:
Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Commit: bb7b450e61a1 - Linux 4.19.49
We then merged the patchset with `git am`:
ethtool-fix-potential-userspace-buffer-overflow.patch
fix-memory-leak-in-sctp_process_init.patch
ipv4-not-do-cache-for-local-delivery-if-bc_forwarding-is-enabled.patch
ipv6-fix-the-check-before-getting-the-cookie-in-rt6_get_cookie.patch
neighbor-call-__ipv4_neigh_lookup_noref-in-neigh_xmit.patch
net-ethernet-ti-cpsw_ethtool-fix-ethtool-ring-param-set.patch
net-mlx4_en-ethtool-remove-unsupported-sfp-eeprom-high-pages-query.patch
net-mvpp2-use-strscpy-to-handle-stat-strings.patch
net-rds-fix-memory-leak-in-rds_ib_flush_mr_pool.patch
net-sfp-read-eeprom-in-maximum-16-byte-increments.patch
net-tls-replace-the-sleeping-lock-around-rx-resync-with-a-bit-lock.patch
packet-unconditionally-free-po-rollover.patch
pktgen-do-not-sleep-with-the-thread-lock-held.patch
revert-fib_rules-return-0-directly-if-an-exactly-same-rule-exists-when-nlm_f_excl-not-supplied.patch
ipv6-use-read_once-for-inet-hdrincl-as-in-ipv4.patch
ipv6-fix-efault-on-sendto-with-icmpv6-and-hdrincl.patch
mtd-spinand-macronix-fix-ecc-status-read.patch
rcu-locking-and-unlocking-need-to-always-be-at-least-barriers.patch
parisc-use-implicit-space-register-selection-for-loading-the-coherence-index-of-i-o-pdirs.patch
nfsv4.1-again-fix-a-race-where-cb_notify_lock-fails-to-wake-a-waiter.patch
nfsv4.1-fix-bug-only-first-cb_notify_lock-is-handled.patch
fuse-fallocate-fix-return-with-locked-inode.patch
pstore-remove-needless-lock-during-console-writes.patch
pstore-convert-buf_lock-to-semaphore.patch
pstore-set-tfm-to-null-on-free_buf_for_compression.patch
pstore-ram-run-without-kernel-crash-dump-region.patch
x86-power-fix-nosmt-vs-hibernation-triple-fault-during-resume.patch
x86-insn-eval-fix-use-after-free-access-to-ldt-entry.patch
i2c-xiic-add-max_read_len-quirk.patch
s390-mm-fix-address-space-detection-in-exception-handling.patch
xen-blkfront-switch-kcalloc-to-kvcalloc-for-large-array-allocation.patch
mips-bounds-check-virt_addr_valid.patch
mips-pistachio-build-uimage.gz-by-default.patch
revert-mips-perf-ath79-fix-perfcount-irq-assignment.patch
genwqe-prevent-an-integer-overflow-in-the-ioctl.patch
test_firmware-use-correct-snprintf-limit.patch
drm-gma500-cdv-check-vbt-config-bits-when-detecting-lvds-panels.patch
drm-msm-fix-fb-references-in-async-update.patch
drm-add-non-desktop-quirk-for-valve-hmds.patch
drm-nouveau-add-kconfig-option-to-turn-off-nouveau-legacy-contexts.-v3.patch
drm-add-non-desktop-quirks-to-sensics-and-osvr-headsets.patch
drm-amdgpu-psp-move-psp-version-specific-function-pointers-to-early_init.patch
drm-radeon-prefer-lower-reference-dividers.patch
drm-amdgpu-remove-atpx_dgpu_req_power_for_displays-check-when-hotplug-in.patch
drm-i915-fix-i915_exec_ring_mask.patch
drm-amdgpu-soc15-skip-reset-on-init.patch
drm-i915-fbc-disable-framebuffer-compression-on-geminilake.patch
drm-i915-maintain-consistent-documentation-subsection-ordering.patch
drm-don-t-block-fb-changes-for-async-plane-updates.patch
drm-i915-gvt-initialize-intel_gvt_gtt_entry-in-stack.patch
tty-serial_core-add-install.patch
ipv4-define-__ipv4_neigh_lookup_noref-when-config_inet-is-disabled.patch
Compile testing
---------------
We compiled the kernel for 4 architectures:
aarch64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aarch64-3821cc6fc6286fbe8ff0111fb3b15821f1446588.config
kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-aarch64-3821cc6fc6286fbe8ff0111fb3b15821f1446588.tar.gz
ppc64le:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-ppc64le-3821cc6fc6286fbe8ff0111fb3b15821f1446588.config
kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-ppc64le-3821cc6fc6286fbe8ff0111fb3b15821f1446588.tar.gz
s390x:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390x-3821cc6fc6286fbe8ff0111fb3b15821f1446588.config
kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s390x-3821cc6fc6286fbe8ff0111fb3b15821f1446588.tar.gz
x86_64:
build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg
configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86_64-3821cc6fc6286fbe8ff0111fb3b15821f1446588.config
kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x86_64-3821cc6fc6286fbe8ff0111fb3b15821f1446588.tar.gz
Hardware testing
----------------
We booted each kernel and ran the following tests:
aarch64:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
✅ Usex - version 1.9-29 [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
ppc64le:
Host 1:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Host 2:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
✅ Usex - version 1.9-29 [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
s390x:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
x86_64:
Host 1:
✅ Boot test [0]
✅ LTP lite [2]
✅ Loopdev Sanity [3]
✅ AMTU (Abstract Machine Test Utility) [4]
✅ Ethernet drivers sanity [5]
✅ audit: audit testsuite test [6]
✅ httpd: mod_ssl smoke sanity [7]
✅ iotop: sanity [8]
✅ tuned: tune-processes-through-perf [9]
✅ Usex - version 1.9-29 [10]
🚧 ✅ Networking socket: fuzz [11]
🚧 ✅ Networking sctp-auth: sockopts test [12]
🚧 ✅ Networking route: pmtu [13]
🚧 ✅ Networking route_func: local [14]
🚧 ✅ Networking route_func: forward [14]
Host 2:
✅ Boot test [0]
✅ selinux-policy: serge-testsuite [1]
Test source:
💚 Pull requests are welcome for new tests or improvements to existing tests!
[0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/kpkginstall
[1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/selinux-policy/serge-testsuite
[2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution/ltp/lite
[3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/loopdev/sanity
[4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu
[5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/driver/sanity
[6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/audit/audit-testsuite
[7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/httpd/mod_ssl-smoke
[8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iotop/sanity
[9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tuned/tune-processes-through-perf
[10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/usex/1.9-29
[11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/socket/fuzz
[12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/sctp/auth/sockopts
[13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/route/pmtu
[14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/route/route_func
Waived tests (marked with 🚧)
-----------------------------
This test run included waived tests. Such tests are executed but their results
are not taken into account. Tests are waived when their results are not
reliable enough, e.g. when they're just introduced or are being fixed.
