[PATCH 4.4 201/241] media: usb: siano: Fix general protection fault in smsusb

[Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>]

From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

commit 31e0456de5be379b10fea0fa94a681057114a96e upstream.

The syzkaller USB fuzzer found a general-protection-fault bug in the
smsusb part of the Siano DVB driver.  The fault occurs during probe
because the driver assumes without checking that the device has both
IN and OUT endpoints and the IN endpoint is ep1.

By slightly rearranging the driver's initialization code, we can make
the appropriate checks early on and thus avoid the problem.  If the
expected endpoints aren't present, the new code safely returns -ENODEV
from the probe routine.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Reported-and-tested-by: syzbot+53f029db71c19a47325a@xxxxxxxxxxxxxxxxxxxxxxxxx
CC: <stable@xxxxxxxxxxxxxxx>
Reviewed-by: Johan Hovold <johan@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/media/usb/siano/smsusb.c |   33 ++++++++++++++++++++-------------
 1 file changed, 20 insertions(+), 13 deletions(-)

--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -391,6 +391,7 @@ static int smsusb_init_device(struct usb
 	struct smsusb_device_t *dev;
 	void *mdev;
 	int i, rc;
+	int in_maxp;
 
 	/* create device object */
 	dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
@@ -402,6 +403,24 @@ static int smsusb_init_device(struct usb
 	dev->udev = interface_to_usbdev(intf);
 	dev->state = SMSUSB_DISCONNECTED;
 
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		struct usb_endpoint_descriptor *desc =
+				&intf->cur_altsetting->endpoint[i].desc;
+
+		if (desc->bEndpointAddress & USB_DIR_IN) {
+			dev->in_ep = desc->bEndpointAddress;
+			in_maxp = usb_endpoint_maxp(desc);
+		} else {
+			dev->out_ep = desc->bEndpointAddress;
+		}
+	}
+
+	pr_debug("in_ep = %02x, out_ep = %02x\n", dev->in_ep, dev->out_ep);
+	if (!dev->in_ep || !dev->out_ep) {	/* Missing endpoints? */
+		smsusb_term_device(intf);
+		return -ENODEV;
+	}
+
 	params.device_type = sms_get_board(board_id)->type;
 
 	switch (params.device_type) {
@@ -416,24 +435,12 @@ static int smsusb_init_device(struct usb
 		/* fall-thru */
 	default:
 		dev->buffer_size = USB2_BUFFER_SIZE;
-		dev->response_alignment =
-		    le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) -
-		    sizeof(struct sms_msg_hdr);
+		dev->response_alignment = in_maxp - sizeof(struct sms_msg_hdr);
 
 		params.flags |= SMS_DEVICE_FAMILY2;
 		break;
 	}
 
-	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
-		if (intf->cur_altsetting->endpoint[i].desc. bEndpointAddress & USB_DIR_IN)
-			dev->in_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
-		else
-			dev->out_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
-	}
-
-	pr_debug("in_ep = %02x, out_ep = %02x\n",
-		dev->in_ep, dev->out_ep);
-
 	params.device = &dev->udev->dev;
 	params.buffer_size = dev->buffer_size;
 	params.num_buffers = MAX_BUFFERS;