[PATCH 4.4 210/241] tty: max310x: Fix external crystal register setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Joe Burmeister <joe.burmeister@xxxxxxxxxxxxx>

commit 5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.

The datasheet states:

  Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
  Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.

The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.

This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.

Signed-off-by: Joe Burmeister <joe.burmeister@xxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/tty/serial/max310x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -571,7 +571,7 @@ static int max310x_set_ref_clk(struct ma
 	}
 
 	/* Configure clock source */
-	clksrc = xtal ? MAX310X_CLKSRC_CRYST_BIT : MAX310X_CLKSRC_EXTCLK_BIT;
+	clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0);
 
 	/* Configure PLL */
 	if (pllcfg) {





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux