From: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
[ Upstream commit 67793bd3b3948dc8c8384b6430e036a30a0ecb43 ]
The driver currently sets register 0xfb (Low Refresh Rate) based on the
value of mode->vrefresh. Firstly, this field is specified to be in Hz,
but the magic numbers used by the code are Hz * 1000. This essentially
leads to the low refresh rate always being set to 0x01, since the
vrefresh value will always be less than 24000. Fix the magic numbers to
be in Hz.
Secondly, according to the comment in drm_modes.h, the field is not
supposed to be used in a functional way anyway. Instead, use the helper
function drm_mode_vrefresh().
Fixes: 9c8af882bf12 ("drm: Add adv7511 encoder driver")
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424132210.26338-1-matt.redfearn@xxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/i2c/adv7511.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index c7c243e9b8083..4300e27ed113e 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -781,11 +781,11 @@ static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
vsync_polarity = 1;
}
- if (mode->vrefresh <= 24000)
+ if (drm_mode_vrefresh(mode) <= 24)
low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
- else if (mode->vrefresh <= 25000)
+ else if (drm_mode_vrefresh(mode) <= 25)
low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
- else if (mode->vrefresh <= 30000)
+ else if (drm_mode_vrefresh(mode) <= 30)
low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
else
low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
--
2.20.1
