On Wed, May 29, 2019 at 07:52:32AM -0500, Bjorn Helgaas wrote:
> On Wed, May 29, 2019 at 11:43:52AM +0200, Niklas Cassel wrote:
> > Currently, there is only a 1 ms sleep after asserting PERST.
> >
> > Reading the datasheets for different endpoints, some require PERST to be
> > asserted for 10 ms in order for the endpoint to perform a reset, others
> > require it to be asserted for 50 ms.
> >
> > Several SoCs using this driver uses PCIe Mini Card, where we don't know
> > what endpoint will be plugged in.
>
> I think this patch is absolutely the right thing to do. We don't know
> what might be plugged in, so we should support arbitrary endpoints.
>
> One could imagine some sort of DT property to identify closed
> environments where there is no need to support arbitrary endpoints and
> it might be desirable to reduce the delay. But that should wait
> until there's a need for it and if the need *does* arise, hopefully
> the definition of such a property could be generic across all SoCs.
>
> > The PCI Express Card Electromechanical Specification specifies:
> > "On power up, the deassertion of PERST# is delayed 100 ms (TPVPERL) from
> > the power rails achieving specified operating limits."
>
> It'd be nice to include the complete citation, i.e., "PCI Express Card
> Electromechanical Specification r2.0, sec 2.2"
I will add it and merge the patch.
Thanks,
Lorenzo
> > Add a sleep of 100 ms before deasserting PERST, in order to ensure that
> > we are compliant with the spec.
> >
> > Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
> > Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> > Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx # 4.5+
> > ---
> > Changes since v1:
> > Move the sleep into qcom_ep_reset_deassert()
> >
> > drivers/pci/controller/dwc/pcie-qcom.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 0ed235d560e3..5d1713069d14 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -178,6 +178,8 @@ static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
> >
> > static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
> > {
> > + /* Ensure that PERST has been asserted for at least 100 ms */
> > + msleep(100);
> > gpiod_set_value_cansleep(pcie->reset, 0);
> > usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
> > }
> > --
> > 2.21.0
> >
