The patch below does not apply to the 3.12-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From edd5b13313551d6b04acfb90d3db58ed3cf3c814 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Date: Mon, 2 Dec 2013 17:39:09 +0000
Subject: [PATCH] drm/i915: Do not clobber config status after a forced restore
of hw state
We call intel_modeset_setup_hw_state() along two paths, driver
load/resume and after a lid event notification. During initialisation of
the driver, it is imperative that we reset the config state. This
correctly sets up the initial connector statuses and prepares the
hardware for a thorough probing. However, during a lid event, we only
want to undo the damage caused by the bios by resetting our last known
mode. In this cirumstance, we do not want to clobber our desired state.
In order to try and keep sanity between the config state and our own
tracking, do the drm_mode_config_reset() first along the load/resume
paths before reading out the hw state and apply any definite known
corrections.
v2: "As discussed on irc I don't think we should force the connector
state to anything here: Imo connector->status should reflect what we
believe to be the true output connection state, whereas connector->encoder
reflects whether this connector is wired up to a pipe. And since we no
longer reject modeset on disconnected connectors and never nuked the pipe
if the connector gets disconnected there's no reason for that - such policy
is userspace's job.
This regression has been introduced in
commit 2e9388923e83bc4e2726f170a984621f1d582e77
Author: Daniel Vetter <daniel.vetter@xxxxxxxx>
Date: Thu Oct 11 20:08:24 2012 +0200
drm/i915/crt: explicitly set up HOTPLUG_BITS on resume"
so sayeth Daniel.
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx (v3.8 and later)
Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 2e367a1c6a64..5b7b7e06cb3a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -651,6 +651,7 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
intel_modeset_init_hw(dev);
drm_modeset_lock_all(dev);
+ drm_mode_config_reset(dev);
intel_modeset_setup_hw_state(dev, true);
drm_modeset_unlock_all(dev);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 114db51996bd..8e44b16950cf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11036,8 +11036,6 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
}
intel_modeset_check_state(dev);
-
- drm_mode_config_reset(dev);
}
void intel_modeset_gem_init(struct drm_device *dev)
@@ -11047,6 +11045,7 @@ void intel_modeset_gem_init(struct drm_device *dev)
intel_setup_overlay(dev);
drm_modeset_lock_all(dev);
+ drm_mode_config_reset(dev);
intel_modeset_setup_hw_state(dev, false);
drm_modeset_unlock_all(dev);
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html