Re: [PATCH 1/1] usb: chipidea: udc: workaround for endpoint conflict issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.05.2019 12:44, Peter Chen wrote:

An endpoint conflict occurs when the USB is working in device mode
during an isochronous communication. When the endpointA IN direction
is an isochronous IN endpoint, and the host sends an IN token to
endpointA on another device, then the OUT transaction may be missed
regardless the OUT endpoint number. Generally, this occurs when the
device is connected to the host through a hub and other devices are
connected to the same hub.

The affected OUT endpoint can be either control, bulk, isochronous, or
an interrupt endpoint. After the OUT endpoint is primed, if an IN token
to the same endpoint number on another device is received, then the OUT
endpoint may be unprimed (cannot be detected by software), which causes
this endpoint to no longer respond to the host OUT token, and thus, no
corresponding interrupt occurs.

There is no good workaround for this issue, the only thing the software
could do is numbering isochronous IN from the highest endpoint since we
have observed most of device number endpoint from the lowest.

Cc: <stable@xxxxxxxxxxxxxxx> #v3.14+
Cc: Jun Li <jun.li@xxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
   drivers/usb/chipidea/udc.c | 24 ++++++++++++++++++++++++
   1 file changed, 24 insertions(+)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 829e947cabf5..411d387a45c9 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1622,6 +1622,29 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
   static int ci_udc_start(struct usb_gadget *gadget,
                        struct usb_gadget_driver *driver);
   static int ci_udc_stop(struct usb_gadget *gadget);
+
+
+/* Match ISOC IN from the highest endpoint */
+static struct

     Um, please break the line before the function's type is fully described.

   Mm, I meant to type "after". :-)


+usb_ep *ci_udc_match_ep(struct usb_gadget *gadget,
+                           struct usb_endpoint_descriptor *desc,
+                           struct usb_ss_ep_comp_descriptor *comp_desc)
+{
+     struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
+     struct usb_ep *ep;
+     u8 type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+     if ((type == USB_ENDPOINT_XFER_ISOC) &&
+             (desc->bEndpointAddress & USB_DIR_IN)) {

     Please add 1 more tab here, so that this line doesn't blend with the
following statement.

+             list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) {
+                     if (ep->caps.dir_in && !ep->claimed)
+                             return ep;
+             }
+     }
+
+     return NULL;
+}
+
   /**
    * Device operations part of the API to the USB controller hardware,
    * which don't involve endpoints (or i/o)

Will change both comments, thanks.

   TIA.

Peter

MBR, Sergei



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux