[PATCH 4.9 30/53] fbdev: sm712fb: fix brightness control on reboot, dont set SR30

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yifeng Li <tomli@xxxxxxxx>

commit 5481115e25e42b9215f2619452aa99c95f08492f upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.

Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.

Stop writing to the SR30 (a.k.a FPR30) register.

Signed-off-by: Yifeng Li <tomli@xxxxxxxx>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Cc: Teddy Wang <teddy.wang@xxxxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>  # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/video/fbdev/sm712fb.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/video/fbdev/sm712fb.c
+++ b/drivers/video/fbdev/sm712fb.c
@@ -1144,8 +1144,8 @@ static void sm7xx_set_timing(struct smtc
 
 		/* init SEQ register SR30 - SR75 */
 		for (i = 0; i < SIZE_SR30_SR75; i++)
-			if ((i + 0x30) != 0x62 && (i + 0x30) != 0x6a &&
-			    (i + 0x30) != 0x6b)
+			if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 &&
+			    (i + 0x30) != 0x6a && (i + 0x30) != 0x6b)
 				smtc_seqw(i + 0x30,
 					  vgamode[j].init_sr30_sr75[i]);
 





[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux