From: Hui Wang <hui.wang@xxxxxxxxxxxxx> commit 8c2e6728c2bf95765b724e07d0278ae97cd1ee0d upstream. The driver will check the monitor presence when resuming from suspend, starting poll or interrupt triggers. In these 3 situations, the jack_dirty will be set to 1 first, then the hda_jack.c reads the pin_sense from register, after reading the register, the jack_dirty will be set to 0. But hdmi_repoll_work() is enabled in these 3 situations, It will read the pin_sense a couple of times subsequently, since the jack_dirty is 0 now, It does not read the register anymore, instead it uses the shadow pin_sense which is read at the first time. It is meaningless to check the shadow pin_sense a couple of times, we need to read the register to check the real plugging state, so we set the jack_dirty to 1 in the hdmi_repoll_work(). Signed-off-by: Hui Wang <hui.wang@xxxxxxxxxxxxx> Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- sound/pci/hda/patch_hdmi.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1661,6 +1661,11 @@ static void hdmi_repoll_eld(struct work_ container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work); struct hda_codec *codec = per_pin->codec; struct hdmi_spec *spec = codec->spec; + struct hda_jack_tbl *jack; + + jack = snd_hda_jack_tbl_get(codec, per_pin->pin_nid); + if (jack) + jack->jack_dirty = 1; if (per_pin->repoll_count++ > 6) per_pin->repoll_count = 0;
