From: Libin Yang <libin.yang@xxxxxxxxx> commit 01c8327667c249818d3712c3e25c7ad2aca7f389 upstream. In resume from S3, HDAC HDMI codec driver dapm event callback may be operated before HDMI codec driver turns on the display audio power domain because of the contest between display driver and hdmi codec driver. This patch adds the device_link between soc card device (consumer) and hdmi codec device (supplier) to make sure the sequence is always correct. Signed-off-by: Libin Yang <libin.yang@xxxxxxxxx> Reviewed-by: Takashi Iwai <tiwai@xxxxxxx> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- sound/soc/codecs/hdac_hdmi.c | 11 +++++++++++ 1 file changed, 11 insertions(+) --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -1829,6 +1829,17 @@ static int hdmi_codec_probe(struct snd_s hdmi->card = dapm->card->snd_card; /* + * Setup a device_link between card device and HDMI codec device. + * The card device is the consumer and the HDMI codec device is + * the supplier. With this setting, we can make sure that the audio + * domain in display power will be always turned on before operating + * on the HDMI audio codec registers. + * Let's use the flag DL_FLAG_AUTOREMOVE_CONSUMER. This can make + * sure the device link is freed when the machine driver is removed. + */ + device_link_add(component->card->dev, &hdev->dev, DL_FLAG_RPM_ACTIVE | + DL_FLAG_AUTOREMOVE_CONSUMER); + /* * hdac_device core already sets the state to active and calls * get_noresume. So enable runtime and set the device to suspend. */
