From: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
commit 78accaea117c1ae878774974fab91ac4a0b0e2b0 upstream.
The lsb calculation is not masking the correct bits from the user input.
Subtract 1 from (1 << offset) to correctly set up the mask to be applied
to user input.
The lsb register stores its value starting at the bit 7 position.
adt7316_store_DAC() currently assumes the value is at the other end of the
register. Shift the lsb value before storing it in a new variable lsb_reg,
and write this variable to the lsb register.
Fixes: 35f6b6b86ede ("staging: iio: new ADT7316/7/8 and ADT7516/7/9 driver")
Signed-off-by: Jeremy Fertic <jeremyfertic@xxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/iio/addac/adt7316.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -1453,7 +1453,7 @@ static ssize_t adt7316_show_DAC(struct a
static ssize_t adt7316_store_DAC(struct adt7316_chip_info *chip,
int channel, const char *buf, size_t len)
{
- u8 msb, lsb, offset;
+ u8 msb, lsb, lsb_reg, offset;
u16 data;
int ret;
@@ -1471,9 +1471,13 @@ static ssize_t adt7316_store_DAC(struct
return -EINVAL;
if (chip->dac_bits > 8) {
- lsb = data & (1 << offset);
+ lsb = data & ((1 << offset) - 1);
+ if (chip->dac_bits == 12)
+ lsb_reg = lsb << ADT7316_DA_12_BIT_LSB_SHIFT;
+ else
+ lsb_reg = lsb << ADT7316_DA_10_BIT_LSB_SHIFT;
ret = chip->bus.write(chip->bus.client,
- ADT7316_DA_DATA_BASE + channel * 2, lsb);
+ ADT7316_DA_DATA_BASE + channel * 2, lsb_reg);
if (ret)
return -EIO;
}
