In megasas_get_target_prop(), driver is incorrectly calculating the target ID for devices with channel 1 and 3. Due to this, firmware will either fail the command (if there is no device with the target id sent from driver) or could return the properties for a target which was not intended. Devices could end up with the wrong queue depth due to this. Fix target id calculation for channel 1 and 3. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx> --- drivers/scsi/megaraid/megaraid_sas_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index f677a84f6bc8..d2714fc833ae 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -6165,7 +6165,8 @@ megasas_get_target_prop(struct megasas_instance *instance, int ret; struct megasas_cmd *cmd; struct megasas_dcmd_frame *dcmd; - u16 targetId = (sdev->channel % 2) + sdev->id; + u16 targetId = ((sdev->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL) + + sdev->id; cmd = megasas_get_cmd(instance); -- 2.16.1
