From: Eric Biggers <ebiggers@xxxxxxxxxx> commit 678cce4019d746da6c680c48ba9e6d417803e127 upstream. The x86_64 implementation of Poly1305 produces the wrong result on some inputs because poly1305_4block_avx2() incorrectly assumes that when partially reducing the accumulator, the bits carried from limb 'd4' to limb 'h0' fit in a 32-bit integer. This is true for poly1305-generic which processes only one block at a time. However, it's not true for the AVX2 implementation, which processes 4 blocks at a time and therefore can produce intermediate limbs about 4x larger. Fix it by making the relevant calculations use 64-bit arithmetic rather than 32-bit. Note that most of the carries already used 64-bit arithmetic, but the d4 -> h0 carry was different for some reason. To be safe I also made the same change to the corresponding SSE2 code, though that only operates on 1 or 2 blocks at a time. I don't think it's really needed for poly1305_block_sse2(), but it doesn't hurt because it's already x86_64 code. It *might* be needed for poly1305_2block_sse2(), but overflows aren't easy to reproduce there. This bug was originally detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. But also add a test vector which reproduces it directly (in the AVX2 case). Fixes: b1ccc8f4b631 ("crypto: poly1305 - Add a four block AVX2 variant for x86_64") Fixes: c70f4abef07a ("crypto: poly1305 - Add a SSE2 SIMD variant for x86_64") Cc: <stable@xxxxxxxxxxxxxxx> # v4.3+ Cc: Martin Willi <martin@xxxxxxxxxxxxxx> Cc: Jason A. Donenfeld <Jason@xxxxxxxxx> Signed-off-by: Eric Biggers <ebiggers@xxxxxxxxxx> Reviewed-by: Martin Willi <martin@xxxxxxxxxxxxxx> Signed-off-by: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/x86/crypto/poly1305-avx2-x86_64.S | 14 +++++++--- arch/x86/crypto/poly1305-sse2-x86_64.S | 22 ++++++++++------ crypto/testmgr.h | 44 ++++++++++++++++++++++++++++++++- 3 files changed, 67 insertions(+), 13 deletions(-) --- a/arch/x86/crypto/poly1305-avx2-x86_64.S +++ b/arch/x86/crypto/poly1305-avx2-x86_64.S @@ -323,6 +323,12 @@ ENTRY(poly1305_4block_avx2) vpaddq t2,t1,t1 vmovq t1x,d4 + # Now do a partial reduction mod (2^130)-5, carrying h0 -> h1 -> h2 -> + # h3 -> h4 -> h0 -> h1 to get h0,h2,h3,h4 < 2^26 and h1 < 2^26 + a small + # amount. Careful: we must not assume the carry bits 'd0 >> 26', + # 'd1 >> 26', 'd2 >> 26', 'd3 >> 26', and '(d4 >> 26) * 5' fit in 32-bit + # integers. It's true in a single-block implementation, but not here. + # d1 += d0 >> 26 mov d0,%rax shr $26,%rax @@ -361,16 +367,16 @@ ENTRY(poly1305_4block_avx2) # h0 += (d4 >> 26) * 5 mov d4,%rax shr $26,%rax - lea (%eax,%eax,4),%eax - add %eax,%ebx + lea (%rax,%rax,4),%rax + add %rax,%rbx # h4 = d4 & 0x3ffffff mov d4,%rax and $0x3ffffff,%eax mov %eax,h4 # h1 += h0 >> 26 - mov %ebx,%eax - shr $26,%eax + mov %rbx,%rax + shr $26,%rax add %eax,h1 # h0 = h0 & 0x3ffffff andl $0x3ffffff,%ebx --- a/arch/x86/crypto/poly1305-sse2-x86_64.S +++ b/arch/x86/crypto/poly1305-sse2-x86_64.S @@ -253,16 +253,16 @@ ENTRY(poly1305_block_sse2) # h0 += (d4 >> 26) * 5 mov d4,%rax shr $26,%rax - lea (%eax,%eax,4),%eax - add %eax,%ebx + lea (%rax,%rax,4),%rax + add %rax,%rbx # h4 = d4 & 0x3ffffff mov d4,%rax and $0x3ffffff,%eax mov %eax,h4 # h1 += h0 >> 26 - mov %ebx,%eax - shr $26,%eax + mov %rbx,%rax + shr $26,%rax add %eax,h1 # h0 = h0 & 0x3ffffff andl $0x3ffffff,%ebx @@ -520,6 +520,12 @@ ENTRY(poly1305_2block_sse2) paddq t2,t1 movq t1,d4 + # Now do a partial reduction mod (2^130)-5, carrying h0 -> h1 -> h2 -> + # h3 -> h4 -> h0 -> h1 to get h0,h2,h3,h4 < 2^26 and h1 < 2^26 + a small + # amount. Careful: we must not assume the carry bits 'd0 >> 26', + # 'd1 >> 26', 'd2 >> 26', 'd3 >> 26', and '(d4 >> 26) * 5' fit in 32-bit + # integers. It's true in a single-block implementation, but not here. + # d1 += d0 >> 26 mov d0,%rax shr $26,%rax @@ -558,16 +564,16 @@ ENTRY(poly1305_2block_sse2) # h0 += (d4 >> 26) * 5 mov d4,%rax shr $26,%rax - lea (%eax,%eax,4),%eax - add %eax,%ebx + lea (%rax,%rax,4),%rax + add %rax,%rbx # h4 = d4 & 0x3ffffff mov d4,%rax and $0x3ffffff,%eax mov %eax,h4 # h1 += h0 >> 26 - mov %ebx,%eax - shr $26,%eax + mov %rbx,%rax + shr $26,%rax add %eax,h1 # h0 = h0 & 0x3ffffff andl $0x3ffffff,%ebx --- a/crypto/testmgr.h +++ b/crypto/testmgr.h @@ -4660,7 +4660,49 @@ static const struct hash_testvec poly130 .psize = 80, .digest = "\x13\x00\x00\x00\x00\x00\x00\x00" "\x00\x00\x00\x00\x00\x00\x00\x00", - }, + }, { /* Regression test for overflow in AVX2 implementation */ + .plaintext = "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff\xff\xff\xff\xff" + "\xff\xff\xff\xff", + .psize = 300, + .digest = "\xfb\x5e\x96\xd8\x61\xd5\xc7\xc8" + "\x78\xe5\x87\xcc\x2d\x5a\x22\xe1", + } }; /*