On 18-03-19, 14:21, Ilias Apalodimas wrote: > Hi Gregory, > > > >> > > > [ 14.909524] clk_pm_cpu_set_parent old=28004840 -> val=0x6000000 load_level=0 > > > [ 14.916424] clk_pm_cpu_set_parent old=2E004840 -> val=0x600 load_level=1 > > > [ 14.923315] clk_pm_cpu_set_parent old=8880A8C0 -> val=0x6000000 load_level=2 > > > [ 14.930572] clk_pm_cpu_set_parent old=8E80A8C0 -> val=0x600 load_level=3 > > > > > > > > > Let me know if you need anything else > > > > Could you show me the output of "cat /sys/kernel/debug/clk/clk_summary" > > > root@localhost ~ # cat /sys/kernel/debug/clk/clk_summary > enable prepare protect duty > clock count count count rate accuracy phase cycle > --------------------------------------------------------------------------------------------- > xtal 2 3 0 25000000 0 0 50000 > i2c_1 0 0 0 25000000 0 0 50000 > i2c_2 0 0 0 25000000 0 0 50000 > avs 0 0 0 25000000 0 0 50000 > TBG-B-S 2 2 0 1000000000 0 0 50000 > cpu 0 0 0 200000000 0 0 50000 > usb32_ss_sys 1 1 0 125000000 0 0 50000 > usb32_usb2_sys 0 0 0 100000000 0 0 50000 > gbe_125 0 0 0 125000000 0 0 50000 > gbe0_125 0 0 0 125000000 0 0 50000 > gbe1_125 0 0 0 125000000 0 0 50000 > gbe_core 1 1 0 250000000 0 0 50000 > gbe_bm 0 0 0 250000000 0 0 50000 > gbe0_core 1 1 0 250000000 0 0 50000 > gbe1_core 0 0 0 250000000 0 0 50000 > eip97 0 0 0 500000000 0 0 50000 > trace 0 0 0 1000000000 0 0 50000 > ddr_fclk 0 0 0 125000000 0 0 50000 > pwm 0 0 0 50000000 0 0 50000 > tscem_tmx 0 0 0 1000000000 0 0 50000 > sec_dap 0 0 0 100000000 0 0 50000 > sec_at 0 0 0 200000000 0 0 50000 > TBG-A-S 0 0 0 1600000000 0 0 50000 > sdio 0 0 0 400000000 0 0 50000 > ddr_phy 0 0 0 400000000 0 0 50000 > mmc 0 0 0 400000000 0 0 50000 > TBG-B-P 0 0 0 500000000 0 0 50000 > gbe_50 0 0 0 50000000 0 0 50000 > gbe0_50 0 0 0 50000000 0 0 50000 > gbe1_50 0 0 0 50000000 0 0 50000 > TBG-A-P 0 1 0 800000000 0 0 50000 > counter 0 0 0 160000000 0 0 50000 > sqf 0 1 0 200000000 0 0 50000 > tscem 0 0 0 200000000 0 0 50000 > sata_host 0 0 0 200000000 0 0 50000 > root@localhost ~ # > > > Also, during this week-end, Christian suggested that the issue might > > come from the AVS support. > > > > Could you disable it and check you still have the issue? > > > > For this, you just have to remove the avs node in > > arch/arm64/boot/dts/marvell/armada-37xx.dtsi and rebuild the dtb. > Sure. You'll have to wait for a week though. Currently on a trip. I'll run that > once i return @Ilias: Can you please try this now and confirm to Gregory ? -- viresh
