5.0-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ]
Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines.
Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to
rely on the bootloader to set them up correctly.
The vendor u-boot sources for Odroid-C1 use the following Ethernet
pinmux configuration:
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f);
SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000);
This translates to the following pin groups in the mainline kernel:
- register 6 bit 0: eth_rxd1 (DIF_0_P)
- register 6 bit 1: eth_rxd0 (DIF_0_N)
- register 6 bit 2: eth_rx_dv (DIF_1_P)
- register 6 bit 3: eth_rx_clk (DIF_1_N)
- register 6 bit 6: eth_tx_en (DIF_3_P)
- register 6 bit 8: eth_ref_clk (DIF_3_N)
- register 6 bit 9: eth_mdc (DIF_4_P)
- register 6 bit 10: eth_mdio_en (DIF_4_N)
- register 6 bit 11: eth_tx_clk (GPIOH_9)
- register 6 bit 12: eth_txd2 (GPIOH_8)
- register 6 bit 13: eth_txd3 (GPIOH_7)
- register 7 bit 20: eth_txd0_0 (GPIOH_6)
- register 7 bit 21: eth_txd1_0 (GPIOH_5)
- register 7 bit 22: eth_rxd3 (DIF_2_P)
- register 7 bit 23: eth_rxd2 (DIF_2_N)
All functions except eth_rxd2 and eth_rxd3 are already supported by the
pinctrl-meson8b driver.
Suggested-by: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reviewed-by: Kevin Hilman <khilman@xxxxxxxxxxxx>
Tested-by: Emiliano Ingrassia <ingrassia@xxxxxxxxxxxxxx>
Reviewed-by: Emiliano Ingrassia <ingrassia@xxxxxxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/pinctrl/meson/pinctrl-meson8b.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index 0f140a802137..7f76000cc12e 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -346,6 +346,8 @@ static const unsigned int eth_rx_dv_pins[] = { DIF_1_P };
static const unsigned int eth_rx_clk_pins[] = { DIF_1_N };
static const unsigned int eth_txd0_1_pins[] = { DIF_2_P };
static const unsigned int eth_txd1_1_pins[] = { DIF_2_N };
+static const unsigned int eth_rxd3_pins[] = { DIF_2_P };
+static const unsigned int eth_rxd2_pins[] = { DIF_2_N };
static const unsigned int eth_tx_en_pins[] = { DIF_3_P };
static const unsigned int eth_ref_clk_pins[] = { DIF_3_N };
static const unsigned int eth_mdc_pins[] = { DIF_4_P };
@@ -599,6 +601,8 @@ static struct meson_pmx_group meson8b_cbus_groups[] = {
GROUP(eth_ref_clk, 6, 8),
GROUP(eth_mdc, 6, 9),
GROUP(eth_mdio_en, 6, 10),
+ GROUP(eth_rxd3, 7, 22),
+ GROUP(eth_rxd2, 7, 23),
};
static struct meson_pmx_group meson8b_aobus_groups[] = {
@@ -748,7 +752,7 @@ static const char * const ethernet_groups[] = {
"eth_tx_clk", "eth_tx_en", "eth_txd1_0", "eth_txd1_1",
"eth_txd0_0", "eth_txd0_1", "eth_rx_clk", "eth_rx_dv",
"eth_rxd1", "eth_rxd0", "eth_mdio_en", "eth_mdc", "eth_ref_clk",
- "eth_txd2", "eth_txd3"
+ "eth_txd2", "eth_txd3", "eth_rxd3", "eth_rxd2"
};
static const char * const i2c_a_groups[] = {
--
2.19.1
