FAILED: patch "[PATCH] tty/serial: atmel: Add is_half_duplex helper" failed to apply to 4.14-stable tree

[<gregkh@xxxxxxxxxxxxxxxxxxx>]

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From f3040983132bf3477acd45d2452a906e67c2fec9 Mon Sep 17 00:00:00 2001
From: Razvan Stefanescu <razvan.stefanescu@xxxxxxxxxxxxx>
Date: Tue, 19 Mar 2019 15:20:34 +0200
Subject: [PATCH] tty/serial: atmel: Add is_half_duplex helper

Use a helper function to check that a port needs to use half duplex
communication, replacing several occurrences of multi-line bit checking.

Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done")
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@xxxxxxxxxxxxx>
Acked-by: Richard Genoud <richard.genoud@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 41b728d223d1..55ca3416113f 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -231,6 +231,13 @@ static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
 	__raw_writeb(value, port->membase + ATMEL_US_THR);
 }
 
+static inline int atmel_uart_is_half_duplex(struct uart_port *port)
+{
+	return ((port->rs485.flags & SER_RS485_ENABLED) &&
+		!(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
+		(port->iso7816.flags & SER_ISO7816_ENABLED);
+}
+
 #ifdef CONFIG_SERIAL_ATMEL_PDC
 static bool atmel_use_pdc_rx(struct uart_port *port)
 {
@@ -608,10 +615,9 @@ static void atmel_stop_tx(struct uart_port *port)
 	/* Disable interrupts */
 	atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
 
-	if (((port->rs485.flags & SER_RS485_ENABLED) &&
-	     !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
-	    port->iso7816.flags & SER_ISO7816_ENABLED)
+	if (atmel_uart_is_half_duplex(port))
 		atmel_start_rx(port);
+
 }
 
 /*
@@ -628,9 +634,7 @@ static void atmel_start_tx(struct uart_port *port)
 		return;
 
 	if (atmel_use_pdc_tx(port) || atmel_use_dma_tx(port))
-		if (((port->rs485.flags & SER_RS485_ENABLED) &&
-		     !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
-		    port->iso7816.flags & SER_ISO7816_ENABLED)
+		if (atmel_uart_is_half_duplex(port))
 			atmel_stop_rx(port);
 
 	if (atmel_use_pdc_tx(port))
@@ -928,9 +932,7 @@ static void atmel_complete_tx_dma(void *arg)
 	 */
 	if (!uart_circ_empty(xmit))
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);
-	else if (((port->rs485.flags & SER_RS485_ENABLED) &&
-		  !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
-		 port->iso7816.flags & SER_ISO7816_ENABLED) {
+	else if (atmel_uart_is_half_duplex(port)) {
 		/* DMA done, stop TX, start RX for RS485 */
 		atmel_start_rx(port);
 	}
@@ -1512,9 +1514,7 @@ static void atmel_tx_pdc(struct uart_port *port)
 		atmel_uart_writel(port, ATMEL_US_IER,
 				  atmel_port->tx_done_mask);
 	} else {
-		if (((port->rs485.flags & SER_RS485_ENABLED) &&
-		     !(port->rs485.flags & SER_RS485_RX_DURING_TX)) ||
-		    port->iso7816.flags & SER_ISO7816_ENABLED) {
+		if (atmel_uart_is_half_duplex(port)) {
 			/* DMA done, stop TX, start RX for RS485 */
 			atmel_start_rx(port);
 		}