From: Matthew Whitehead <tedheadster@xxxxxxxxx>
[ Upstream commit 18fb053f9b827bd98cfc64f2a35df8ab19745a1d ]
There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:
setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:
outb(CX86_CCR2, 0x22);
inb(0x23);
>From the comments:
* When using the old macros a line like
* setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
* gets expanded to:
* do {
* outb((CX86_CCR2), 0x22);
* outb((({
* outb((CX86_CCR2), 0x22);
* inb(0x23);
* }) | 0x88), 0x23);
* } while (0);
The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.
Signed-off-by: Matthew Whitehead <tedheadster@xxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: luto@xxxxxxxxxx
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@xxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/x86/kernel/cpu/cyrix.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index aaf152e79637..0007827196a4 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -120,7 +120,7 @@ static void set_cx86_reorder(void)
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */
- setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
/* set load/store serialize from 1GB to 4GB */
ccr3 |= 0xe0;
setCx86(CX86_CCR3, ccr3);
@@ -131,11 +131,11 @@ static void set_cx86_memwb(void)
printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */
- setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
}
/*
@@ -149,14 +149,14 @@ static void geode_configure(void)
local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */
- setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */
- setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
+ setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
@@ -291,7 +291,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
- setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
@@ -314,7 +314,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)
if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
- setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
+ setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
} else {
/* A 6x86MX - it has the bug. */
set_cpu_bug(c, X86_BUG_COMA);
--
2.19.1
